ArduVoice-9x Voice Module with Arduino for the 9x Radio

er9x is the best known firmware. It has a superb range of features and is well supported by the community. Well worth trying out.
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Post by jhsa »

Good choice :)

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

kmargos
Posts: 86
Joined: Mon Jun 05, 2017 7:54 pm
Country: -

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Post by kmargos »

Hi !!!

Have any update? A0...A3, D8, D7 and D2 work in serial amod? Date of my firmware : 19/03/2015. TKS !!!
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Post by jhsa »

I'm afraid I don't understand your question, sorry :o

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
kmargos
Posts: 86
Joined: Mon Jun 05, 2017 7:54 pm
Country: -

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Post by kmargos »

Lol, im from Brazil, sorry my english. I will try again!!!

In arduino, pins A0 ... A3, D8, D7 and D2 already have utility? Any updates in 2017?
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Post by jhsa »

We speak the same language then, Portuguese :) But we need to speak English here so everybody understand :)

A0 to A3 and D2 are not used. D7 and D8 can be used for 2 extra switches or push buttons.. Please see the schematics on the first post of this thread..

viewtopic.php?f=5&t=6831

No more updates to this.. It is good as it is and not so many people using it anymore. I believe that most of us upgraded our 9x radios with a better board like the Ar9x board or the 9xtreme board (not sold anymore) That already bring the voice/audio circuitry on the board..

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

kmargos
Posts: 86
Joined: Mon Jun 05, 2017 7:54 pm
Country: -

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Post by kmargos »

Just wanted to know if Arduvoice evolved into more external buttons. I think of buying an AR9 X in the future. Thanks for answering.
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Post by jhsa »

ArduVoice supports 2 extra buttons as I said above. D7 and D8.. :)

João

Sent from my thor using Tapatalk

My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
AmatorAVR
Posts: 2
Joined: Mon Jun 19, 2017 9:52 pm
Country: -

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Post by AmatorAVR »

Hi guys! I have the same issue then i try to start Serial SD functions as in the Posts: 1378.
PC Display shows:
Monitor
xx|xx|
xx|xx|xx|

where the "x" is an empty square box sign for an unprintable character
List mode does not work.

the other functions are OK. Does sombodie know what is the reason of the problem?
AmatorAVR
Posts: 2
Joined: Mon Jun 19, 2017 9:52 pm
Country: -

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Post by AmatorAVR »

Perhaps, I am ready to answer my own question. Since I used arduino nano, it was necessary to disconnect DTR pin of CH340 from reset cerquit. For this it is necessary to desolder the capacitor between pin13 CH340 and pin 28 ATMEGA328. Maybe someone will find this information useful.
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Post by jhsa »

Good find.. I was never able to make it work with a NANO.. :)

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
kmargos
Posts: 86
Joined: Mon Jun 05, 2017 7:54 pm
Country: -

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Post by kmargos »

Hi !!!

For the external and tri-band buttons, do you need to solder pull-up resistors or can you connect directly, just grounding the signal so the arduino recognizes the command?

Para os botões externos e trins, precisa de soldar resistores de pull up ou pode-se conectar direto, apenas aterrando o sinal para que o arduino reconheça o comando?
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Post by jhsa »

Não precisa de pullups. Só ligar o botão ao pino e ao GND. :)

No need for pullups. Just connect the buttons between the pins and ground..

João

Sent from my thor using Tapatalk

My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
kmargos
Posts: 86
Joined: Mon Jun 05, 2017 7:54 pm
Country: -

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Post by kmargos »

Tks João.

I sent you a private message. I do not know what's happening.


https://www.youtube.com/watch?v=dCv-ocT3NE4
Some time later.
https://www.youtube.com/watch?v=Oc85gGki5DI
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Post by jhsa »

I have seen your message. Unfortunately it is very difficult for me at the moment to look at all your data as I have quite limited internet access where I am and I am also quite busy. You know, family and all that :)
I will have a look in a few days, or even before if I can.

João

Sent from my thor using Tapatalk

My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
kmargos
Posts: 86
Joined: Mon Jun 05, 2017 7:54 pm
Country: -

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Post by kmargos »

Estou pedindo ajuda ao Mike, quando coloco o ATMEGA328 de volta ao arduino, tudo pode ser escrito e lido, mas quando coloco em minha placa, apenas consigo escrever o bootloader(as vezes).

Estranho que tudo parecia funcionar no inicio, mas parou de funcionar.

I'm asking Mike for help, when I put the ATMEGA328 back to the Arduino, everything can be written and read, but when I put it on my board, I can only write the bootloader(sometimes).

Strange that everything seemed to work at first, but stopped working.

Tks João !!!

videos https://www.youtube.com/watch?v=dCv-ocT3NE4
https://www.youtube.com/watch?v=Oc85gGki5DI


Marco.
kmargos
Posts: 86
Joined: Mon Jun 05, 2017 7:54 pm
Country: -

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Post by kmargos »

Acho que descobri o problema, lendo o datasheet do atmega, vi que a frequência máxima a 3.3V é de 13.3Mhz, estou usando um cristal de 16Mhz, fazendo com que o atmega328 entre em overclock. Isso explica porque via uma fumaça do fluxo de solda subindo. :lol: :lol:

I think I discovered the problem by reading the datasheet of the atmega, I saw that the maximum frequency at 3.3V is 13.3Mhz, I'm using a 16Mhz crystal, causing the atmega328 to overclock. This explains why he saw smoke rising from the welding stream.

Living and learning !
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Post by jhsa »

I think I used 5V on mine, but also a SD Card module that can work at that voltage.
I believe Mike adapted the serial code to 12Mhz as well as 16Mhz.
If you are using the old board design that was used for the parallel voice module, you want to use the 12Mhz version, and 3.3V. Otherwise you might damage the SD Card..

João

Sent from my thor using Tapatalk

My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
kmargos
Posts: 86
Joined: Mon Jun 05, 2017 7:54 pm
Country: -

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Post by kmargos »

Eu apenas usei 3.3V com 16MHz.
Acho que vou manter o cristal de 16MHz com alimentação em 5V e usar um conversor lógico de 5V para 3.3V somente para o cartão SD.
Estou pedindo ao mike a versão serial de 12MHz e 8Mhz. Acho que não irá ficar lento demais com 8MHz.

I just used 3.3V with 16MHz.
I think I will keep the 16MHz crystal with power at 5V and use a logic converter from 5V to 3.3V only for the SD card.
I'm asking Mike for the serial version of 12MHz and 8Mhz. I do not think it will be too slow at 8MHz.
Tks !!

Marco.
User avatar
MikeB
9x Developer
Posts: 17979
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Post by MikeB »

I've never built a version to run at 8MHz. Are you able to build the firmware from the sources? You may find the sources here: https://github.com/MikeBland/mbtx/tree/master/amod.

A built 12MHz file is here: viewtopic.php?f=5&t=4598#p64969, in amod_last.zip.

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
kmargos
Posts: 86
Joined: Mon Jun 05, 2017 7:54 pm
Country: -

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Post by kmargos »

MikeB wrote: Tue Aug 01, 2017 8:00 am I've never built a version to run at 8MHz. Are you able to build the firmware from the sources? You may find the sources here: https://github.com/MikeBland/mbtx/tree/master/amod.

A built 12MHz file is here: viewtopic.php?f=5&t=4598#p64969, in amod_last.zip.

Mike.
Thanks Mike, I'll try!!
kmargos
Posts: 86
Joined: Mon Jun 05, 2017 7:54 pm
Country: -

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Post by kmargos »

The micro SD Card module was not recognizing all the cards, I made this little mod, and started reading all my cards that were in trouble.

Marco,
Attachments
Fiz card Module.jpg
rcfish
Posts: 62
Joined: Tue Jan 10, 2017 8:11 pm
Country: Germany

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Post by rcfish »

Hello,
I wanted to install an arduvoice and everything seems to work (flashing bootloader).
I have installed 1N4001 diodes instead of the bat85 because I only had those and I thought it's worth a try.
I couldn't flash firmware using the diodes. After that I removed them and the only thing I got was magic smoke.
As you can see on the on the picture a trace on the power switch board burnt out. I don't know what happens . Is it because of the missing diodes or did I put my arduvoice power connections to the wrong place (you can see the wires on the photo ).
The arduvoice modul and the radio main board still seem to work.

rcfish
Attachments
IMG_4376[1].JPG
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Post by jhsa »

It looks like you have shorted something, somewhere..

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
tnap1979
Posts: 1
Joined: Tue Feb 06, 2018 1:10 pm
Country: -

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Post by tnap1979 »

hey guys.. i have a th-9x, vibe mod, piezo mod, backlight done, dsmx internal module mod
trainer and throttle cut switch swap so its like spektrum, as im a spektrum flyer..
open tx installed, my question..
i would like voice, but i dont have a pro mini, i have a uno r3 with a sd card shield tho..
could this work?
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Post by jhsa »

I doubt it, serial mode is only supported by Er9x as far as I know..

The uno would probably work, never tested it though. But it is quite big.
You can get very cheap arduino pro mini clones on eBay..

João




My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
hackerjoe
Posts: 89
Joined: Fri Dec 08, 2017 1:58 am
Country: United States

How does this board look - https://oshpark.com/shared_projects/ZFFMBWpj

Post by hackerjoe »

Hi I was wondering if the board looks ok to anyone? ----- https://oshpark.com/shared_projects/ZFFMBWpj

They still sell it.
I came across this last night.
3 of them for $4.20
It doesn't include any parts - just a fyi
I will have to try and get all the parts for it from China they are so much cheaper but it will be like 1-2 months before I see them lol
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Post by jhsa »

The link on that project is for the serial voice module.. OpenTX DOES NOT SUPPORT serial voice module..
The PCB is for a parallel voice module as far as i understand. Which firmware do you use? openTX or Er9x?
Er9x supports the arduvoice module, openTX doesn't.

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
hackerjoe
Posts: 89
Joined: Fri Dec 08, 2017 1:58 am
Country: United States

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Post by hackerjoe »

I have Er9x - I just noticed it says Works excellent OpenTX
Oh well.
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Post by jhsa »

It should also work with er9x, but it is not an ArduVoice, it is a Megasound board which is parallel. It could probably be modified to work as serial.. I don't have the board though so I don't know the schematic for it..

João

Sent from my BLN-L21 using Tapatalk

My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
hackerjoe
Posts: 89
Joined: Fri Dec 08, 2017 1:58 am
Country: United States

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Post by hackerjoe »

Hi João,

I have been reading through all the posts here and planned to build your 2 board design but see there's a single board design.
Which is easier to fit in a 9X? I'm guessing the 2 board design is.
Do you have a photo of the back of the single board build & what size is it? ( I see the photo of the front of the board on page 1 here ).
I may have to order a bigger stripboard if I go with the single board. I think I ordered (2) 5cmx7cm boards only.

I want to be 100% sure of all the cuts in the circuits.
I ordered everything new I don't have from eBay.

One other question what is the value/resistance on the shunts if there is any?

Post Reply

Return to “er9x”