Hi,
I've got not only the 9xr working well with the 350 QX (2), but also stagility mode. This took a fair amount of research, as I couldn't find a good answer elsewhere.
The full details are here https://www.dropbox.com/s/fkusrfajedcvg ... x.zip?dl=0
Setting up the Switches:
Setting up the Mixes:
Controls
THR: cuts the engines.
GEA: Return to Home.
3POS: SAFE, AP, and Stability Mode
AIL: Stagility Mode (When in Stability Mode)
RUD: Backlight for Tx
To enter Stagility mode, start in Stability mode, then turn AIL ON.
Have fun! This thing is awesome with Stagility...
Turnigy 9xr Blade 350QX Stagility Mode
-
- Posts: 2
- Joined: Fri Dec 05, 2014 11:17 am
- Country: -
Turnigy 9xr Blade 350QX Stagility Mode
- Attachments
-
- Mixes.png (5.71 KiB) Viewed 2527 times
-
- Posts: 2
- Joined: Mon Mar 02, 2015 8:06 am
- Country: -
Re: Turnigy 9xr Blade 350QX Stagility Mode
I hope yu dont mind me hijacking your thread, but what txmodule did you use to bind to the blade 350? I've got the orangerx dsmx module and for the life of me I cant get it to bind, have you got any tips?
i really appreciate any help
i really appreciate any help