Page 2 of 2

Re: Er9x NEW User's Manual

Posted: Sun Oct 30, 2016 6:11 pm
by AlexLmm
That's wonderful!
Thank you!

Re: Er9x NEW User's Manual

Posted: Fri Feb 24, 2017 10:27 pm
by Wrongway
Thank You so much everyone!! :mrgreen:

Re: Er9x NEW User's Manual

Posted: Sun Mar 12, 2017 8:25 pm
by Mazeppa
Many thanks to the writers of the updated Er9x manual.

Re: Er9x NEW User's Manual

Posted: Sun Mar 12, 2017 9:35 pm
by jhsa
You're welcome :)

Enjoy ;)

João

Re: Er9x NEW User's Manual

Posted: Thu Jul 13, 2017 2:39 am
by roscored1000
Mike I am curious about flight voltage showing as well, I have r220 a X4Rsb and using a XJT module,sbus is active, I have RSSI showing but not sure what to do about voltage, is it possible as the above post says there are better ways to generate alarms. I am using a SPRacing F3 Flight controller and inav software with the vbat connected. I tried going to page 2 on telemetry and put in a value of 13.3v to start with and the next column showed 4.8v ??? not sure if I am trying to do the right thing here or not? thanks

Re: Er9x NEW User's Manual

Posted: Fri Jul 21, 2017 5:58 pm
by MikeB
Setting the A1 ratio gets you the receiver voltage.

I don't know that flight controller, or inav software. Can this provide FrSky SPort telemetry data?

Mike.

Re: Er9x NEW User's Manual

Posted: Fri Feb 16, 2018 9:49 pm
by artg
Greetings,

I'm trying to use a Turnigy 9xr with a Multimodule and er9x, however I'm stuck at being able to bind it to a FrskyX LBT receiver.

I've pulled the latest firmware on http://www.er9x.com/ for a 9XR 128bit version but I struggle to see any other subproticol options than Ch_8 and Ch_16.

The er9x version I've gotten says 821 on the site at the moment, however the TX states it is V1.748-Mike, er9x-r820.

Any help would be appreciated.

Art

Re: Er9x NEW User's Manual

Posted: Sat Feb 17, 2018 10:04 am
by MikeB
Go here: http://openrcforums.com/forum/viewtopic.php?f=5&t=4598, download "er9xProv822a.zip", extract "er9x-128.hex" and try that.

Mike

Re: Er9x NEW User's Manual

Posted: Sat Feb 17, 2018 4:42 pm
by artg
Hi Mike,

Thanks for the quick reply. I gave that a go, sadly no luck. I'm using the eePe from the website not one of the test ones (let me know if that makes a difference).

I can see that v822 is installed (even tried v822, 128, German version), but only the subprotocols of Ch_16 and Ch_8 under FrskyX.

To add to that I have updated my multi module (iRangeX 4..+) with the latest firmware if that makes a difference (apologies, I'm new to this).

Could there be a bug in v822 for 128 or am I possibly doing something wrong?

Also if it helps to keep things organised we can move this feedback/test to the test forum if this is more appropriate.

Thanks,
Art

Re: Er9x NEW User's Manual

Posted: Sat Feb 17, 2018 7:54 pm
by MikeB
OK, I've just built a new test version that should fix this.
I've put it on http://www.er9x.com/. At the bottom right you should find "r822c" available for dowmload.

Mike

Re: Er9x NEW User's Manual

Posted: Sat Feb 17, 2018 9:27 pm
by artg
Hi Mike,

You are a legend, thank you for making a release for me. It worked! You've made my week!