Mixer problem.... Help Required

er9x is the best known firmware. It has a superb range of features and is well supported by the community. Well worth trying out.
Post Reply
Tech1uk
Posts: 40
Joined: Mon Aug 11, 2014 7:27 pm
Country: United Kingdom
Location: South UK

Mixer problem.... Help Required

Post by Tech1uk »

Hi All,

I'm the process of setting up a new model truck and require an mix which I thought would be fairly basic to setup. But at the moment it has me beat and I'm sure this is really simple :?

I have the following,
Mixers

CH01 +100%THR
-100%THR Switch(GEA)
-100%THR Switch(RUD)
CH02
CH03
CH04
CH05
CH06
CH07 +100%THR Switch(GEA)
CH08 +100%THR Switch(RUD)

So if GRE & RUD are off then Ch1 works on THR and nothing on Ch7 or Ch8
If GRE is switched on Ch7 works on THR and nothing on Ch1 or Ch8
If RUD is switched on Ch8 works on THR and nothing on Ch1 or Ch7

The above is what I require,,,
BUT what I need is if GRE & RUD are switched on together then nothing happens on THR. At the moment I have Ch1,Ch7 & Ch1 working if GRE & RUD are switched on together.

Any Ideas?

Cheers

Steve

(Sorry mods if this is in the wrong section)

User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Mixer problem.... Help Required

Post by MikeB »

Set up a custom switch (being renamed to a Logical switch in new versions of er9x):
CS1 AND !GEA !RUD
Now just use:
CH01 +100% THR Switch(CS1)

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
Tech1uk
Posts: 40
Joined: Mon Aug 11, 2014 7:27 pm
Country: United Kingdom
Location: South UK

Re: Mixer problem.... Help Required

Post by Tech1uk »

Thanks Mike for the quick reply,

Unfortunately this has' worked unless I have set this work.

I have the following,

Mixers

CH01 +100%THR
-100%THR Switch(GEA)
-100%THR Switch(RUD)
+100%THR Switch(SW1)


CH07 +100%THR Switch(GEA)
CH08 +100%THR Switch(RUD)

Custom Switches
SW1 !RUD AND !GEA


And more ideas or is this user error on my part :D :D

BTW I'm on er9x-r813

Cheers

Steve
User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Mixer problem.... Help Required

Post by MikeB »

You only need the one mix I described on channel 1, no others.

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
Tech1uk
Posts: 40
Joined: Mon Aug 11, 2014 7:27 pm
Country: United Kingdom
Location: South UK

Re: Mixer problem.... Help Required

Post by Tech1uk »

Sorry just noted that, :oops: :oops:

So with your set up and both GEA & RUD switched on Ch1 is now dead but Ch7 and Ch8 are still working.

I need to kill all 3 ch's if that makes sense.

Cheers

Tech1uk
Posts: 40
Joined: Mon Aug 11, 2014 7:27 pm
Country: United Kingdom
Location: South UK

Re: Mixer problem.... Help Required

Post by Tech1uk »

Sorted, not sure if there is a easier way tho,

I've set the following,

Mixers
CH01 +100%THR Switch(SW1)

CH07 +100%THR Switch(GEA)
-100%THR Switch(SW2)
CH08 +100%THR Switch(RUD)
-100%THR Switch(SW2)

Custom Switches
SW1 !GEA AND !RUD
SW2 GEA AND RUD

Thanks though Mike as you pointed me in the right direction. :D

Cheers
Steve

Post Reply

Return to “er9x”