Hello, I am trying to write for a ship a mixer, but I can not continue. Can you help me?
Two controllers + engines, a rudder.
CH1 100 ELE (engine 1)
CH2 100 ELE THR (engine 2)
+ 100 THR ! THR
CH3 100 AIL (rudder)
I want the engines to help the rudder:
Example:
Rudder to the right = Right motor backwards / Left motor forward
Speed of the motors depending on the position of the ELE
I figured it this way:
if the motors (ELE) are out, I can move the rudder (ALI) without running the engines.
When the motors are running, the rowing motion should affect the speed or direction of rotation of the motors.
Greetings and thanks
Dirk
ship mixer (Schiffs Mischer)
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: ship mixer (Schiffs Mischer)
Try this:
CH01: +100% ELE
+100% CH16
CH02: +100% ELE
-100% CH16 (-100% weight)
CH16: +100% AIL (rudder)
* +100% ELE (MULTIPLY multiplex)
Mike.
CH01: +100% ELE
+100% CH16
CH02: +100% ELE
-100% CH16 (-100% weight)
CH16: +100% AIL (rudder)
* +100% ELE (MULTIPLY multiplex)
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: ship mixer (Schiffs Mischer)
Hello Mike,
Thanks, that's ok. With hard rowing we could get this done also, that a motor runs forward and the other backwards? (as in a tank control)
Greetings Dirk
Thanks, that's ok. With hard rowing we could get this done also, that a motor runs forward and the other backwards? (as in a tank control)
Greetings Dirk
- KAL
- Posts: 552
- Joined: Thu Oct 10, 2013 4:36 pm
- Country: Germany
- Location: somewhere near Rothenburg ob der Tauber
Re: ship mixer (Schiffs Mischer)
Hallo Dirk,
unfortunately I don't know if your version of er9x can use scalers as input to mixers.
This would make it possible to sent ch16 to a scaler (see menu for GVARs) that multiplies by two and
then use this scaler in ch1 and ch2 instead of ch16.
If this is not possible (I fear) try to increase weight of ch16 in the following way:
CH01: +100% ELE
+125% CH16
CH02: +100% ELE
-125% CH16 (-125% weight)
CH16: +125% AIL (rudder)
* +125% ELE (MULTIPLY multiplex)
Gruß
Klaus
unfortunately I don't know if your version of er9x can use scalers as input to mixers.
This would make it possible to sent ch16 to a scaler (see menu for GVARs) that multiplies by two and
then use this scaler in ch1 and ch2 instead of ch16.
If this is not possible (I fear) try to increase weight of ch16 in the following way:
CH01: +100% ELE
+125% CH16
CH02: +100% ELE
-125% CH16 (-125% weight)
CH16: +125% AIL (rudder)
* +125% ELE (MULTIPLY multiplex)
Gruß
Klaus
( TH9X / 9XTreme / FrSky DHT / Spektrum / Multi / RotEnc )
( 9XR PRO / erSKY9x / FrSky DHT / Spektrum / Multi / RotEnc / P3 as Slider )
( 9XR PRO / erSKY9x / FrSky DHT / Spektrum / Multi / RotEnc / P3 as Slider )
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: ship mixer (Schiffs Mischer)
CH16: +100% ELE
+100% ELE
* +100% AIL
will double the effect of CH16 and give you reverse as well.
Mike.
+100% ELE
* +100% AIL
will double the effect of CH16 and give you reverse as well.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
- KAL
- Posts: 552
- Joined: Thu Oct 10, 2013 4:36 pm
- Country: Germany
- Location: somewhere near Rothenburg ob der Tauber
Re: ship mixer (Schiffs Mischer)
Sometimes I don't see the forest because of too many trees ...
Thanks to the flexibility of er9x there often is more than one way to achieve the goal ...
Klaus
Thanks to the flexibility of er9x there often is more than one way to achieve the goal ...
Klaus
( TH9X / 9XTreme / FrSky DHT / Spektrum / Multi / RotEnc )
( 9XR PRO / erSKY9x / FrSky DHT / Spektrum / Multi / RotEnc / P3 as Slider )
( 9XR PRO / erSKY9x / FrSky DHT / Spektrum / Multi / RotEnc / P3 as Slider )
Re: ship mixer (Schiffs Mischer)
Mike, What about allowing the mixer to go well over 125%??CH16: +100% ELE
+100% ELE
* +100% AIL
Something like this..
CH16 +175% ELE
* +100% AIL
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: ship mixer (Schiffs Mischer)
Only got 8 bits for the weight value, so +/- 125.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: ship mixer (Schiffs Mischer)
Thank you, I did it as Mike wrote it and it works.
Greetings and thanks
Dirk
Greetings and thanks
Dirk