Another jitter.
-
- Posts: 14
- Joined: Sat Aug 02, 2014 9:29 pm
- Country: -
Re: Another jitter.
Just wanted to let everyone who helped me, after servo replacement finally ready for flight. Ran a forty minute test on the stand no problems!!
Re: Another jitter.
I have a problem with my ailerons jittering when moving the stick. All my other servos work fine. I have loaded 4 planes in to the radio and every one of the planes have the same problem. Some of the aileron servos are digital and most are analog. I am using the 8 channel Turnigy RXs. I just got this radio from another person and had the er9x software downloaded in to it. Is there some setting or menu to get rid of this jittering problem?
Re: Another jitter.
What radio is it? Can you try another RF module and receiver??
If you are using er9x, get to a main screen where the channels are displayed as numbers.. do they jitter?
João
If you are using er9x, get to a main screen where the channels are displayed as numbers.. do they jitter?
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Another jitter.
Yes the numbers jump all over the place unless you move the stick to the extremes. Then it will go to 100 and stay there. I am beginning to think that the aileron stick is bad.jhsa wrote:What radio is it? Can you try another RF module and receiver??
If you are using er9x, get to a main screen where the channels are displayed as numbers.. do they jitter?
João
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Another jitter.
Look in the DIAGANA screen, you can see the actual stick value there to see if it is jittering.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Another jitter.
Thanks for the replies. I found that the problem was the aileron pot. A good friend of mine replaced the whole gimbal and that solved the problem. I flew two planes with the radio this morning with absolute control. I am really impressed with all the features I now have thanks to the er9x FW. Who ever wrote the FW did an excellent job, THANK YOU.MikeB wrote:Look in the DIAGANA screen, you can see the actual stick value there to see if it is jittering.
Mike.
Terry