Page 1 of 1

Er9x test versions

Posted: Mon Nov 25, 2013 11:50 am
by MikeB
This is NOT intended as a thread for discussions, just as somewhere I can put test versions of er9x for people to try out.
The idea is I'll put a specific test version on here, with a reason why it is here. Later, when I have something else to test I'll remove that one and replace it with another.
This should stop lots of test versions all over the forum, and help avoid the forum taking up more space on the server than it needs to.

Mike.

NOTE: 08-Jan-2016, r820 is now released, also eepe r419.
er9x-2561K1.zip
03-Nov-2017 15:11
Test version for kmargos (2561)
(88.91 KiB) Downloaded 263 times
eepe.zip
25-Jan-2017 23:21
2nd attempt to fix related switch defaults bug!
(1.37 MiB) Downloaded 793 times
eepe.zip
25-Jan-2017 18:30
Fix related switch defaults bug!
(1.37 MiB) Downloaded 140 times
eepe.zip
24-Jan-2017
Fix switch defaults bug
(1.37 MiB) Downloaded 124 times
er9xProv822a.zip
15-Jan-2017 23:08
More Multi text added
(977.29 KiB) Downloaded 472 times
er9x-128.zip
10-Nov-2016 22:59
'128 only, add "HuBRAW" processing
(87.93 KiB) Downloaded 324 times
er9x-frsky-olrsFix.zip
04-Nov-2016 12:22
Possible fix for telemetry problem when using Orange lrs
(73.36 KiB) Downloaded 182 times
er9xProv821g_multiDSM-2.zip
20-Sep-2016 10:21
MULTI DSM update on 128/2561
Only use with an updated MULTI module on DSM
(973.33 KiB) Downloaded 315 times
eepe.zip
04-Aug-2016 23:32
Fix baudrate on telemetry menu
(1.35 MiB) Downloaded 310 times
er9xProv821f.zip
03-Aug-2016 23:33
Add latest (FQ777) MULTI options
(388.53 KiB) Downloaded 320 times
er9x-128-2561p816.zip
12-July-2016 15:01
Add 16/8 channel option for PXX protocol
(172.21 KiB) Downloaded 177 times
eepe.zip
25-May-2016 11:47
Add "disable pre-read" option in settings
(1.35 MiB) Downloaded 178 times
er9xProv821e.zip
12-Apr-2016 14:27
Correct MULTI FrSky CH_16 and CH_8
(386.9 KiB) Downloaded 254 times
er9xProv821d.zip
07-Apr-2016 11:12
Add MULTI SFHSS and FrSky CH_16 and CH_8
(386.89 KiB) Downloaded 112 times
er9x-128P3a.zip
21-Mar-2016 18:36
2nd Attempt to fix P3 problem
(85.52 KiB) Downloaded 103 times
er9xProv821c.zip
16-Mar-2016 17:04
Add another MULTI protocol
(386.89 KiB) Downloaded 122 times
er9x-2561-128.zip
09-Feb-2016 16:39
Special versions with "Mavlink over FrSky" support. Needs specific Arduino translator.
Telemetry Menu bug fixed
(170.73 KiB) Downloaded 136 times
er9x-2561-128.zip
09-Feb-2016 12:21
Special versions with "Mavlink over FrSky" support. Needs specific Arduino translator.
(170.73 KiB) Downloaded 95 times
er9xProv821b.zip
26-Jan-2016 10:51
Further MULTI changes
Re-label Delay up and down
Add Q242 sub-protocol on MULTI
(383.13 KiB) Downloaded 132 times
er9xProv821a.zip
22-Jan-2016 16:19
Further MULTI changes
(383.05 KiB) Downloaded 98 times
er9xProv821.zip
11-Jan-2016 14:32
H8_3D MULTI supported
(382.71 KiB) Downloaded 141 times
amod_last.zip
23-Jan-2015 18:50
Fix the formatting of the .eepm file so it reads properly in eepe.
(26.36 KiB) Downloaded 204 times

Re: Er9x test versions

Posted: Fri Apr 24, 2015 12:20 pm
by petaca
Dear Mike

I have installed on my TX:

  er9x-R811
Version: V1.532-Mike
date 03.21.2014
mod: FRSKY - 128

I use EEPE program (version prior to 411).

My question is:

You may not copy EEPE in some pc setup menus of my radio?

For example, after copying all my models on the pc, I find the saved copy menu scales .... (SC1, SC2 ..... etc)

It is possible that the version of the program used EEPE not have ability to copy these menus from the radio tx to my pc?

I have thought that copying models from the pc to the transmitter radio, to review the SC1, SC2 menus, surprise !! .... Missing data SC1, SC2 etc ....

You believe that you need to update EEPE to solve this problem?

thank you very much

gabriel

Re: Er9x test versions

Posted: Fri Apr 24, 2015 1:17 pm
by MikeB
The latest eepe version is 412. You may downloadit from here: https://code.google.com/p/eepe/source/b ... nstall.zip.

The definitely works reading the Scalers from the radio, I just tested it.

Mike.

Re: Er9x test versions

Posted: Fri Apr 24, 2015 2:10 pm
by Daedalus66
Just a reminder from Post #1:
"This is NOT intended as a thread for discussions, just as somewhere I can put test versions of er9x for people to try out."

Re: Er9x test versions

Posted: Sat May 09, 2015 11:29 pm
by QuarX
Dear Mike
Thank you very much for your great work!!, very appreciated here.
I have installed on my TX:

Version: V1.285-Mike
SVN: er9x-r818
date 04.27.2015
mod: FRSKY - 128

I have made the telemetry mod and it work well, but with this firmware version the THR and AIL switches are not working.
Any way to activate the switch mod in this version?
EDITED:
SORRY!! i can see now the option telemetry mod don in the "general configuration"
Works like a charm!
Thank you very much for this state of the art piece of software.
Best Regards
Jose A.

Re: Er9x test versions

Posted: Sun Jul 10, 2016 11:24 am
by andrenoites
Hello Mike

I am testing you latest er9xProv821e firmware in my 9xr with a XJT module and it's working really good:

er9xProv821e.zip
12-Apr-2016 14:27
Correct MULTI FrSky CH_16 and CH_8
(386.9 KiB) Downloaded 111 times

The only thing I can't configure is the number of channels in the PXX D16 protocol, this is a really important feature because in a Taranis we can change from 16CH to 8CH and the frame size is reduced from 18ms to only 9ms.

In the disclaimer of your latest test version it shows "Correct MULTI FrSky CH_16 and CH_8"
Is this the same feature I am talking about? if not could it be possible to add this feature?

Thank you for your awesome work, I really enjoy flying with your firmware :)

Re: Er9x test versions

Posted: Sun Sep 04, 2016 12:16 pm
by zipray
Hello Mike

Magic Mike, salute to you.
I have installed on my 9xr with a Multiprotocol-TX-Moduleand.it's working really good in Serial mode.

Version: V1.542-Mike
SVN: er9x-r820
date 04.27.2015
mod: FRSKY - NT

I want to know, can I use the futaba simulator interface to connect the bluetooth module receiving telemetry data using a mobile phone or computer?

Re: Er9x test versions

Posted: Sun Sep 04, 2016 3:44 pm
by MikeB
As mentioned in the first post "This is NOT intended as a thread for discussions, just as somewhere I can put test versions of er9x for people to try out."
Please post your question in another thread that is more suitable.

Mike.

Re: Er9x test versions

Posted: Fri Dec 01, 2017 6:58 pm
by phil
Hello Mike, I got a small problem again. I bought the very cheap transmitter Turnigy 9x with AFHDS2A protokol. I can not bind with the er9x software, r820. the default binding PPM and the stored "multi" file with AFHDS2A does not get any binding. Is that a big problem or should I get a 4in1 module. would ersky9x run in this station? Sincerely, Siegi

Re: Er9x test versions

Posted: Fri Dec 01, 2017 8:37 pm
by MikeB
Please try using PPM but change the POLARITY to NEG.

Mike.

Re: Er9x test versions

Posted: Sat Dec 02, 2017 4:52 am
by phil
Thanks Mike, I've already tried all possible settings. the receiver does not matter, the flashing of the lamp is always the same, no twitch. I'm not an individual case, in the review has written one that after the installation of er9x no binding was possible, only with a multi-module. thanks, and best regards, Siegi

Re: Er9x test versions

Posted: Sat Dec 02, 2017 10:43 am
by MikeB
Please go over to this thread:
viewtopic.php?f=5&t=10578&p=133564#p132741
where this Tx is discussed.
It was reported there that all worked when using PMM with NEG polarity.

Mike.

Re: Er9x test versions

Posted: Sat Dec 02, 2017 1:20 pm
by phil
Hello Mike, thank you very much for the info. I have been able to bind only one receiver in the delivery condition. the second he accepted but without function. I then had to tie the first receiver again. Now with er9x-d I have been able to bind the original with many different binding methods. I was also able to tie the 2nd FS IA6B, but the servos did not work. I could not tie a 3-passenger TGY IA6. I suspect that the transmitter module AFHDS2A has a binding weakness. warm regards Siegi

Re: Er9x test versions

Posted: Sun Feb 04, 2018 5:09 pm
by phil
hello, in my Turnigy 9x I have installed er9x, version 820th now I would like to load the test version 820 and have problems. PC, Programmer is equally the driver. With the software load command, the eepe program starts correctly and one thinks it is completely compromised. After a short while the eepe stops and the info follows: Loading not possible. I have a riddle, have tried many things like other drivers, other programmers, but the final loading was not possible. What I do not understand, I could load the standard software. Thank you

Re: Er9x test versions

Posted: Sun Feb 04, 2018 8:33 pm
by Daedalus66
Phil
Mike has asked you repeatedly NOT to use this thread for discussion.



Sent from my iPhone using Tapatalk