Hi all,
I would try to make a wiper fonction on a servo motor with er9x software for my truck, is that possible ?
+ I would like to add a fonction that the speed of the wiper is proportional with the speed of the throttle (that'll be the paradise for me)
If that is possible, thx a lot by advance for some exemple
Traxx
Need help for wiper fonction
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Need help for wiper fonction
As a starting point, try the "Servo Test" template (in eepe, or on the 9X if you have a '128 processor).
This makes a servo sweep from end to end slowly. You may need to set "Fast Mix Delay" on to get a reasonable sweep rate.
Mike
This makes a servo sweep from end to end slowly. You may need to set "Fast Mix Delay" on to get a reasonable sweep rate.
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!