4P4T Slide Switches for SKY9x - 16ch TX with er9x

er9x is the best known firmware. It has a superb range of features and is well supported by the community. Well worth trying out.
Post Reply
Schmitt77
Posts: 2
Joined: Tue Nov 21, 2017 5:48 pm
Country: -

4P4T Slide Switches for SKY9x - 16ch TX with er9x

Post by Schmitt77 »

Can I use this 4P4T Slide Switches for my SKY9x and setup the 16ch Tx with er9x?

User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: 4P4T Slide Switches for SKY9x - 16ch TX with er9x

Post by Kilrah »

Huh?
User avatar
bob195558
Posts: 2377
Joined: Sun Dec 16, 2012 7:24 pm
Country: United States
Location: New England, Vermont
Contact:

Re: 4P4T Slide Switches for SKY9x - 16ch TX with er9x

Post by bob195558 »

Hi Schmitt77,
If you have a Sky9x radio you will need to use erSky9x firmware not er9x.

Why do you feel you want to use (install) Slide Switches ? :?:
Slide Switch (SS_44D04_G4)
Slide Switch (SS_44D04_G4)

You can upgrade your two position switches to three position switches if needed
and would be a better way to add more switches.

Bob B.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
Schmitt77
Posts: 2
Joined: Tue Nov 21, 2017 5:48 pm
Country: -

Re: 4P4T Slide Switches for SKY9x - 16ch TX with er9x

Post by Schmitt77 »

Hello Bob B., Thanks for your reply and advice. Yeah, I want to upgrade two position switches to three position switches.
User avatar
bob195558
Posts: 2377
Joined: Sun Dec 16, 2012 7:24 pm
Country: United States
Location: New England, Vermont
Contact:

Re: 4P4T Slide Switches for SKY9x - 16ch TX with er9x

Post by bob195558 »

Some info about 3-position switches on the Sky9x radio: (viewtopic.php?f=7&t=5468&p=102745&hilit ... hes#p94698)
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).

Post Reply

Return to “er9x”