4P4T Slide Switches for SKY9x - 16ch TX with er9x
4P4T Slide Switches for SKY9x - 16ch TX with er9x
Can I use this 4P4T Slide Switches for my SKY9x and setup the 16ch Tx with er9x?
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: 4P4T Slide Switches for SKY9x - 16ch TX with er9x
Hi Schmitt77,
If you have a Sky9x radio you will need to use erSky9x firmware not er9x.
Why do you feel you want to use (install) Slide Switches ?
You can upgrade your two position switches to three position switches if needed
and would be a better way to add more switches.
Bob B.
If you have a Sky9x radio you will need to use erSky9x firmware not er9x.
Why do you feel you want to use (install) Slide Switches ?
You can upgrade your two position switches to three position switches if needed
and would be a better way to add more switches.
Bob B.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
Re: 4P4T Slide Switches for SKY9x - 16ch TX with er9x
Hello Bob B., Thanks for your reply and advice. Yeah, I want to upgrade two position switches to three position switches.
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: 4P4T Slide Switches for SKY9x - 16ch TX with er9x
Some info about 3-position switches on the Sky9x radio: (viewtopic.php?f=7&t=5468&p=102745&hilit ... hes#p94698)
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).