Need help with advanced servo programming

er9x is the best known firmware. It has a superb range of features and is well supported by the community. Well worth trying out.
Post Reply
moo10032
Posts: 9
Joined: Tue Dec 31, 2013 9:08 pm
Country: -

Need help with advanced servo programming

Post by moo10032 » Wed Sep 06, 2017 6:28 am

Hey I have a small crane on my RC boat, it is controlled by 2 normal servos (it has limited range) I've been trying to make it so to control the crane I can use the joystick on my radio that has 2 spring returns, but its a pain to move the crane very precisely. How can I make the joystick input simply add or subtract from the cranes servo? Basically I want to just tap the joystick to move the crane, and when I center the stick the crane stays where it is. Can this be programmed on er9x?

Please help! Thanks.

User avatar
MikeB
9x Developer
Posts: 15561
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Need help with advanced servo programming

Post by MikeB » Wed Sep 06, 2017 7:30 am

Have a look at this thread: viewtopic.php?f=94&t=6223&hilit=progressive.

Mike.
ersky9x/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

moo10032
Posts: 9
Joined: Tue Dec 31, 2013 9:08 pm
Country: -

Re: Need help with advanced servo programming

Post by moo10032 » Wed Sep 06, 2017 6:50 pm

Thanks! I got it working looking through that link.

Post Reply

Return to “er9x”