A Custom Tray For The 9x
A Custom Tray For The 9x
Something I'd like to share.. I have a friend in Portugal from my former club that designed a really nice tray for the 9x radio.. actually he designed it first for his JR Radio but he had a prototype made for the 9x and I asked him to make me one..
Here are some photos..
It was laser cut and is made of acrylic. It has a little compartment where you can put a bigger battery or store stuff like cables. Can also use it for putting a receiver and battery for an wireless buddy system..
as you can see on the pictures the tx is held in place by the handle using a locking system. the only thing that is missing at this point is a rest for the arms if you fly with the fingers, but he is working on a removable one.. I do fly with my thumbs on the sticks, so for me it is not required at this moment. I didn't fly with it yet but it feels quite good. I think it will make it easier to launch the airplanes also as I can take both my hands off the radio and it doesn't move.. Will upload a video of my tray being cut as soon as i can fix the internet on my main computer. it's funny that when I left everything worked and come back to a broken UPS and internet.. Life I guess
Here are some photos..
It was laser cut and is made of acrylic. It has a little compartment where you can put a bigger battery or store stuff like cables. Can also use it for putting a receiver and battery for an wireless buddy system..
as you can see on the pictures the tx is held in place by the handle using a locking system. the only thing that is missing at this point is a rest for the arms if you fly with the fingers, but he is working on a removable one.. I do fly with my thumbs on the sticks, so for me it is not required at this moment. I didn't fly with it yet but it feels quite good. I think it will make it easier to launch the airplanes also as I can take both my hands off the radio and it doesn't move.. Will upload a video of my tray being cut as soon as i can fix the internet on my main computer. it's funny that when I left everything worked and come back to a broken UPS and internet.. Life I guess
Last edited by jhsa on Wed Jan 30, 2013 1:32 pm, edited 2 times in total.
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: A Custom Tray For The 9x
Here is another photo as the maximum file number alowed per post seems to be 5..
Forgot to say that you can use this tray to work with the radio when working on the bench programming it. It has a retractable foot that keeps the tx at an angle when on the bench. It was one of the main reasons why I got it actually.
Also when you are outside, you can avoid the sun on the display by turning the tray upside down. It will then balance on the arms for the strap.. It's always good to cover the tx with some cloth anyway..
Joäo
Forgot to say that you can use this tray to work with the radio when working on the bench programming it. It has a retractable foot that keeps the tx at an angle when on the bench. It was one of the main reasons why I got it actually.
Also when you are outside, you can avoid the sun on the display by turning the tray upside down. It will then balance on the arms for the strap.. It's always good to cover the tx with some cloth anyway..
Joäo
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: A Custom Tray For The 9x
Nice! How can I get one? (I would prefer red and black)
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
Re: A Custom Tray For The 9x
You can visit his site and contact him by following the link.. also here is the email address. At the moment the site is in Portuguese but he is working on the English version
http://www.pterodax.com
[email protected]
[email protected]
http://www.pterodax.com
[email protected]
[email protected]
Last edited by jhsa on Thu Aug 23, 2012 11:35 am, edited 1 time in total.
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: A Custom Tray For The 9x
silver platter! It needs to be made of silver iwith gold plated accent to fit ersky9x.
Re: A Custom Tray For The 9x
well, ask him.. he might do it..
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: A Custom Tray For The 9x
Ok, here are a couple of videos of some parts of my tray being cut..
[BBvideo 425,350]http://www.youtube.com/watch?v=SKi3--UsA4I[/BBvideo]
[BBvideo 425,350]http://www.youtube.com/watch?v=BSk-NcioTyw[/BBvideo]
[BBvideo 425,350]http://www.youtube.com/watch?v=SKi3--UsA4I[/BBvideo]
[BBvideo 425,350]http://www.youtube.com/watch?v=BSk-NcioTyw[/BBvideo]
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: A Custom Tray For The 9x
I will never be as drunk as you.
To support the forum:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=82QKZZN5ZC8JE
To support ER9X:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=82QKZZN5ZC8JE
To support ER9X:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: A Custom Tray For The 9x
well, if you could read it...
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: A Custom Tray For The 9x
Joäo,
Thanks for the intro to this tray. Have you had much time to try it out yet?.
Very interested in getting one, freight is a bit of a killer to this part of the world NZ,(half cost of the unit).
Want to satisfy myself before committing. I really need one as i find hand launching my powered glider
rather cumbersome and need something rigid and this looked the part.
Thanks
Les
P.S is it supplied built up or in flat pack form?.
Thanks for the intro to this tray. Have you had much time to try it out yet?.
Very interested in getting one, freight is a bit of a killer to this part of the world NZ,(half cost of the unit).
Want to satisfy myself before committing. I really need one as i find hand launching my powered glider
rather cumbersome and need something rigid and this looked the part.
Thanks
Les
P.S is it supplied built up or in flat pack form?.
Re: A Custom Tray For The 9x
I think that normally is supplied assembled.. But I can ask my friend if he can send it as a kit if people wish..
I?ve been flying with it for a little while now. On the first day it felt strange but I found out it was because I was using it a bit too high. Lowered it a bit and it feels good now.. It is very handy to hand launch. before I had to hold the radio with one hand on it's side to keep my thumb on the stick and advance the throttle with my mouth.. that is gone now..
Wanted to make a video of me using it today but I was alone at the field
Will make one as soon as I find a cameraman
João
I?ve been flying with it for a little while now. On the first day it felt strange but I found out it was because I was using it a bit too high. Lowered it a bit and it feels good now.. It is very handy to hand launch. before I had to hold the radio with one hand on it's side to keep my thumb on the stick and advance the throttle with my mouth.. that is gone now..
Wanted to make a video of me using it today but I was alone at the field
Will make one as soon as I find a cameraman
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: A Custom Tray For The 9x
holly! cutting with CNC laser for a toy. I am still using my 9.00 MIC dremel, which shatter my hand due to vibration, to cut holes in my Tx.
Re: A Custom Tray For The 9x
He uses it to work, so why not?? He didn't buy it on purpose for this..
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: A Custom Tray For The 9x
who knows, After all, he is a good friend of yours! Birds of a feather.
actually , I would rather see your vid of hand launch without that thing, and hold the stick with your mouth.
actually , I would rather see your vid of hand launch without that thing, and hold the stick with your mouth.
Re: A Custom Tray For The 9x
I didn't say hold the Radio stick with my mouth.. I said Advance the throttle stick with my mouth Don't twist my words please..
And you will not see such a video because I will never need to do it again now that I have this tray..
João
And you will not see such a video because I will never need to do it again now that I have this tray..
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: A Custom Tray For The 9x
hmmmm, advance the stick with the mouth without holding the stick with mouth. hmmm, you must be blowing it really hard.
anyway, that is a good tray.
anyway, that is a good tray.
Re: A Custom Tray For The 9x
No, advancing the throttle stick with the mouth is not a blowing job, as you can do it with your mouth closed.. or use the nose for example..
Anyway we were talking about this tray, and that as with any other tray, is much easier to launch the models..
João
Anyway we were talking about this tray, and that as with any other tray, is much easier to launch the models..
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: A Custom Tray For The 9x
ROFL !!!!! Just teasing.
Like I said your friend's is a really good one. especially the way it's made.
Like I said your friend's is a really good one. especially the way it's made.
Re: A Custom Tray For The 9x
I'm not as drunk as thinkle peep I am!
Re: A Custom Tray For The 9x
Muuaahh haha haa
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: A Custom Tray For The 9x
Hi Les, just spoke to my friend and he can also send it as a kit.. It will be a little cheaper of course..iwik wrote:Joäo,
Thanks for the intro to this tray. Have you had much time to try it out yet?.
Very interested in getting one, freight is a bit of a killer to this part of the world NZ,(half cost of the unit).
Want to satisfy myself before committing. I really need one as i find hand launching my powered glider
rather cumbersome and need something rigid and this looked the part.
Thanks
Les
P.S is it supplied built up or in flat pack form?.
Also I think he found cheaper postage. He will mail you shortly..
He also found cheaper postage to the UK. I hope that the postage to Germany is also cheaper because I want another one for my other radio.. this time in black
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: A Custom Tray For The 9x
Hi João,
Thanks for asking. I was hoping a flat pack version may have lowered the cost a little. Will look forward to his reply.
I like the idea of the tray enclosed, very handy.
Les
Thanks for asking. I was hoping a flat pack version may have lowered the cost a little. Will look forward to his reply.
I like the idea of the tray enclosed, very handy.
Les
Re: A Custom Tray For The 9x
Here is a video of me using my tx tray to fly my modded Pico Cub.. The video is boring. It's just me flying, so if you want just watch the beginning and the end. that's where it shows the tray and some audio funcionallity on the 9x..
Didn't have anyone at the field to film so I had to leave my phone in the car.
http://www.youtube.com/watch?v=hkfd_b3A1Wg
João
Didn't have anyone at the field to film so I had to leave my phone in the car.
http://www.youtube.com/watch?v=hkfd_b3A1Wg
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: A Custom Tray For The 9x
This one shows the tray better.. I had some help for filming today
[BBvideo 425,350]http://www.youtube.com/watch?v=v9CCynHq ... e=youtu.be[/BBvideo]
João
[BBvideo 425,350]http://www.youtube.com/watch?v=v9CCynHq ... e=youtu.be[/BBvideo]
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: A Custom Tray For The 9x
jhsa:
what is the trick of lacuching these push motor plane? I still have problem launching My AXN. It just dip down (flat down not diving - head down) after I throw it out then climb up. I see yours just fly straight out even. most of the time mine AXN belly is almost touching the ground before it climbs up.
what is the trick of lacuching these push motor plane? I still have problem launching My AXN. It just dip down (flat down not diving - head down) after I throw it out then climb up. I see yours just fly straight out even. most of the time mine AXN belly is almost touching the ground before it climbs up.
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: A Custom Tray For The 9x
Sounds like you either have the motors thrust line out of wack.. kr the cog is wrong.
One option is a launch mode switch that adds up elevator for launch.
Sent from my Nexus 7 using Tapatalk 2
One option is a launch mode switch that adds up elevator for launch.
Sent from my Nexus 7 using Tapatalk 2
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
Re: A Custom Tray For The 9x
the easystar, well at least the old version also has that problem.. I guess I'm just used to it.. but the tray does make it easier to launch.. before it was difficult to launch and hold the radio.. No, Kaos, I'm not going to describe it again
But yeah I think the easystar has a wrong motor angle as well..
But yeah I think the easystar has a wrong motor angle as well..
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: A Custom Tray For The 9x
this is as good as I can launch it. http://www.youtube.com/watch?v=zQyXi0nKS9o
most of the time it is like this: http://www.youtube.com/watch?v=53GEkDJWAhg
the CG seems to be good not head heavy or tail heavy, just during the launching the whole pane likes to drop as a whole.
edit : wrong link on 2nd vid
most of the time it is like this: http://www.youtube.com/watch?v=53GEkDJWAhg
the CG seems to be good not head heavy or tail heavy, just during the launching the whole pane likes to drop as a whole.
edit : wrong link on 2nd vid
Last edited by kaos on Mon Sep 03, 2012 11:06 pm, edited 1 time in total.
Re: A Custom Tray For The 9x
yeah, the easystar tends to do the same.. I think I just automatically pull on the elevator when I launch it.. In normal flight, when I push forward on the throttle wants to dive a little..
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: A Custom Tray For The 9x
hmm, let me program some ele in id1 then , after level out switch to id0 again. good idea. will try.
I am kind of worried with that kind of launch what happen when I load it up with full gear of FPV. It is almost ready for the full FPV maiden.
sorry if I rubbed your thread.
It is a nice looking tray.
I am kind of worried with that kind of launch what happen when I load it up with full gear of FPV. It is almost ready for the full FPV maiden.
sorry if I rubbed your thread.
It is a nice looking tray.