Hello,
I have an eachine racer 250 and there's a led system that can be set with a channel on the receiver. it's like a multi-stable state (red;blue;green;white;off then red...)
I'd like to use this to make my led blink.
Question : is there a wait to program a channel as a bi-stable (on, wait X ms, off, wait another ms...)
Thank you
How to "blink" a channel
-
- Posts: 750
- Joined: Tue Dec 27, 2011 11:22 pm
- Country: United States
- Location: Carson City, Nv
Re: How to "blink" a channel
Make a logical switch
Lx Timer 0.1 2.0
Pick a channel to control LEDs. I used 4.
Mix
Ch 4 Lx Weight 100 (LEDBlnk)
Lx Timer 0.1 2.0
Pick a channel to control LEDs. I used 4.
Mix
Ch 4 Lx Weight 100 (LEDBlnk)
Dean
OldDmbThms: 1. Takeoff, 2. Crash, 3. Repair, GOTO 1
OldDmbThms: 1. Takeoff, 2. Crash, 3. Repair, GOTO 1
Re: How to "blink" a channel
Thank you it works