Turnigy 9X V1 with Taranis V1 gimbals problem on Open TX
Turnigy 9X V1 with Taranis V1 gimbals problem on Open TX
Hi All.
Due to a bad pot on my trunigy 9x, i have replaced the gimbals of my Taranis (A01 version 2013) by new ones, the original gimbals of the taranis have been succesfully integrated in my 9X V1.
The fact is that the right horizontal and the left vertical are inverted, the only software able to deal mith it is ER9X V1.442-MIKE SVN:er9X-r818 in english.
I have tried with a french version of er9x, the gimbal inversion is not working, i have also tried with open TX for 9x, i have the same problem.
I know that my radio is woorking well on ER9X, but my aim is to have it working on Open TX as it was initially befor replacing the gimbals.
Thank in advance for your help.
Laurent.
Due to a bad pot on my trunigy 9x, i have replaced the gimbals of my Taranis (A01 version 2013) by new ones, the original gimbals of the taranis have been succesfully integrated in my 9X V1.
The fact is that the right horizontal and the left vertical are inverted, the only software able to deal mith it is ER9X V1.442-MIKE SVN:er9X-r818 in english.
I have tried with a french version of er9x, the gimbal inversion is not working, i have also tried with open TX for 9x, i have the same problem.
I know that my radio is woorking well on ER9X, but my aim is to have it working on Open TX as it was initially befor replacing the gimbals.
Thank in advance for your help.
Laurent.
Re: Turnigy 9X V1 with Taranis V1 gimbals problem on Open TX
I believe openTX also has an option to invert the sticks..
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Turnigy 9X V1 with Taranis V1 gimbals problem on Open TX
Yes it has, but it's not working... here is my problem.
Re: Turnigy 9X V1 with Taranis V1 gimbals problem on Open TX
Ahh, ok.. then you will have to report the issue to openTX..
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Turnigy 9X V1 with Taranis V1 gimbals problem on Open TX
My topic is not the right way to do it?
Envoyé de mon GT-I8190 en utilisant Tapatalk
Envoyé de mon GT-I8190 en utilisant Tapatalk
Re: Turnigy 9X V1 with Taranis V1 gimbals problem on Open TX
It's been a long time since I last used opentx but I think you have to go here:
https://github.com/opentx/opentx/issues
João
https://github.com/opentx/opentx/issues
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Turnigy 9X V1 with Taranis V1 gimbals problem on Open TX
Thanks, i'll try this if I don't get any more answer until tomorrow.
Envoyé de mon HTC One mini en utilisant Tapatalk
Envoyé de mon HTC One mini en utilisant Tapatalk
Re: Turnigy 9X V1 with Taranis V1 gimbals problem on Open TX
I think you should try it now.. it is more likely the developers will see it there than here..
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Turnigy 9X V1 with Taranis V1 gimbals problem on Open TX
You're right, but I'd like to find if I haven't done something wrong before annoying the developers.
Envoyé de mon HTC One mini en utilisant Tapatalk
Envoyé de mon HTC One mini en utilisant Tapatalk
Re: Turnigy 9X V1 with Taranis V1 gimbals problem on Open TX
I've tried threw companion as I haven't managed to modify this point on the radio directly.
Re: Turnigy 9X V1 with Taranis V1 gimbals problem on Open TX
Please say what version of radio/processor you have, what version of OpenTX and what options are selected.
Re: Turnigy 9X V1 with Taranis V1 gimbals problem on Open TX
V1 Turnigy 9x the main board has a soldering plot at wrong place to add the usb connection.
The inversion works on er9x V1.442-MIKE SUN:ER9X-R818
latest try on open tx was on the v2.1.3 fr.
The inversion works on er9x V1.442-MIKE SUN:ER9X-R818
latest try on open tx was on the v2.1.3 fr.
Re: Turnigy 9X V1 with Taranis V1 gimbals problem on Open TX
No specific options only standard software for both ones.
Re: Turnigy 9X V1 with Taranis V1 gimbals problem on Open TX
OK so you have an atmega64.
If you look at the options for OpenTX on m64 you'll find a "stickrev" option, which must be enabled for that feature to be available.
If you look at the options for OpenTX on m64 you'll find a "stickrev" option, which must be enabled for that feature to be available.
Re: Turnigy 9X V1 with Taranis V1 gimbals problem on Open TX
Ok, I'm blind....
It's now working... I was not used to the options...my fault, i haven't searched in the right place in companion.
Thank you for the help Kilrah.
Laurent
It's now working... I was not used to the options...my fault, i haven't searched in the right place in companion.
Thank you for the help Kilrah.
Laurent
Re: Turnigy 9X V1 with Taranis V1 gimbals problem on Open TX
Today I updated my 9X with taranis gimbals to 2.2.0, but the stickrev option doesn't seem to work anymore.