OpenTX 2.0.3 with Sky9Xboard : ASSAN X8J doesn't work

openTx has introduced a range of new features, ideas and bling. It is fast becoming the firmware of choice for many users. openTx will run on ALL current hardware platforms, including the gruvin9x and sky9x boards. Work has already started to support the new FrSky X9D radio!
Post Reply
Toxi81
Posts: 7
Joined: Thu Jun 19, 2014 4:48 pm
Country: -

OpenTX 2.0.3 with Sky9Xboard : ASSAN X8J doesn't work

Post by Toxi81 »

Hello guys,

Main issue:
I have updated new openTX firmware 2.0.3 on sky9x board but my external transmiter module ASSAN X8J doesn't work. The red LED on the back side is still red after radio starts up. I checked the configuration with opentx 2.0.2, which the module works correctly with, but it is the same (PPM mode 22.5ms 300us). Can you help me with this issue?

The next problem is that USB storage doesn't work in normal mode.

Will it be ever the ersky9x opentx firmware supported MAVLINK ? Because I don't have the ersky platform and I would try make the telemetry via APC220 455MHZ RS232 module

Post Reply

Return to “openTx”