To be even more precise http://www.rcgroups.com/forums/showthre ... st28161759 is the source for Amber. Aaron said he expects to record the missing pieces this weekend.erieqc wrote:Go over here to get your answer to Amber these guys have nothing to do with that.
http://www.rcgroups.com/forums/showthre ... 65&page=73
OpenTX - Nightly builds for pre-2.0 testing
- Scott Page
- Posts: 864
- Joined: Wed Dec 28, 2011 3:32 am
- Country: United States
- Location: Tri-Cities, Washington State
Re: OpenTX - Nightly builds for pre-2.0 testing
Re: OpenTX - Nightly builds for pre-2.0 testing
One more minor problem with T-Source and timers that I just stumbled over. (r2.0.1)
Set
Timer1 source to ID1
Timer2 source to ID2
T-Source to P1
Don't move any controls
And this is what the statistics screen displays 1. after some time (30sec to 1 min) TH% timer display starts stepping with more than 1 sec per step and this increment is increasing with time. (Timers TH% running on the normal system screen run correctly)
2. There should be a constant horizontal graf with not more than the 100% line as no control was touched.
After I played around for a while with different setups, all of a sudden the timer ran correctly.
But Power Off/On with the described setup again showed the problem.
Reinhard
Set
Timer1 source to ID1
Timer2 source to ID2
T-Source to P1
Don't move any controls
And this is what the statistics screen displays 1. after some time (30sec to 1 min) TH% timer display starts stepping with more than 1 sec per step and this increment is increasing with time. (Timers TH% running on the normal system screen run correctly)
2. There should be a constant horizontal graf with not more than the 100% line as no control was touched.
After I played around for a while with different setups, all of a sudden the timer ran correctly.
But Power Off/On with the described setup again showed the problem.
Reinhard
Re: OpenTX - Nightly builds for pre-2.0 testing
There was an issue, was patched yesterday as far as I can see so it should be good in 2.0.2.
Re: OpenTX - Nightly builds for pre-2.0 testing
ok, Thanks
Reinhard
Reinhard
Re: OpenTX - Nightly builds for pre-2.0 testing
Tested it with my latest download from Github (not sure what version it is exactly) and everything does work.
Throttle graf and timers are running as expected.
Thanks
btw. my download gives a compilation error in module switches.cpp "THLD_MAX not defined" if I compile with option "GAUGES=NO"
Reinhard
Throttle graf and timers are running as expected.
Thanks
btw. my download gives a compilation error in module switches.cpp "THLD_MAX not defined" if I compile with option "GAUGES=NO"
Reinhard
Re: OpenTX - Nightly builds for pre-2.0 testing
Just downloadad 2.0,2.
Sorry guys, Companion still doesn't play sounds on my Win XP desktop or laptop.
Sorry guys, Companion still doesn't play sounds on my Win XP desktop or laptop.
-
- 9x Developer
- Posts: 2764
- Joined: Fri Dec 30, 2011 11:11 pm
- Country: -
Re: OpenTX - Nightly builds for pre-2.0 testing
I check it now.ReSt wrote:Tested it with my latest download from Github (not sure what version it is exactly) and everything does work.
Throttle graf and timers are running as expected.
Thanks
btw. my download gives a compilation error in module switches.cpp "THLD_MAX not defined" if I compile with option "GAUGES=NO"
Reinhard
-
- 9x Developer
- Posts: 2764
- Joined: Fri Dec 30, 2011 11:11 pm
- Country: -
Re: OpenTX - Nightly builds for pre-2.0 testing
Fixed on github
Re: Sv: OpenTX - Nightly builds for pre-2.0 testing
Yes our attempts at fixing the problems (there were more than one) actually seems to have completely broken sound on Windows. I could get 2.0.1 to work by manually setting up the sound module (Phonon). That does not work in 2.0.2lexm wrote:Just downloadad 2.0,2.
Sorry guys, Companion still doesn't play sounds on my Win XP desktop or laptop.
Support of the Hungarian voices.
Dear Bertrand!
We want you to be inside in Hungarian voices in the menu (optional). Now we can currently only be used if the SD card is "sound\en" folder will be overwritten by the original English.
The menu, of course, "English" should be selected.
Recommended access:
sound\hu
Menu: Hungarian (voice).
Internal management (words assembly) is the same as an English.
Can be downloaded from the Hungarian language pack:
http://file.emiter.hu/file/Modellezes/T ... ka_V15.zip
Thank you!!!
We want you to be inside in Hungarian voices in the menu (optional). Now we can currently only be used if the SD card is "sound\en" folder will be overwritten by the original English.
The menu, of course, "English" should be selected.
Recommended access:
sound\hu
Menu: Hungarian (voice).
Internal management (words assembly) is the same as an English.
Can be downloaded from the Hungarian language pack:
http://file.emiter.hu/file/Modellezes/T ... ka_V15.zip
Thank you!!!
http://rc.emiter.hu/ (MegaSound 9X, GCL-2, FrSky-RSSI-DAC, etc.) Keress fel!
-
- 9x Developer
- Posts: 2764
- Joined: Fri Dec 30, 2011 11:11 pm
- Country: -
Re: OpenTX - Nightly builds for pre-2.0 testing
You want me to be inside the hungarian voices? I am not sure I understand your post!!! I see a zip, do you want me to put it on the server? What about introuducing a hungarian choice in the language selection (which letters?), even if we use the same code than english? It would make sense to me.
Re: OpenTX - Nightly builds for pre-2.0 testing
Yes they want! Sorry for the bad English, I use translator.
We want you to menu (Taranis) Hungary would sound selection option.
Please upload the zip to your server.
I copied the place for English, speaking perfectly. I do not know yet what kind of information do you need?
We want you to menu (Taranis) Hungary would sound selection option.
Please upload the zip to your server.
I copied the place for English, speaking perfectly. I do not know yet what kind of information do you need?
http://rc.emiter.hu/ (MegaSound 9X, GCL-2, FrSky-RSSI-DAC, etc.) Keress fel!
-
- 9x Developer
- Posts: 2764
- Joined: Fri Dec 30, 2011 11:11 pm
- Country: -
Re: OpenTX - Nightly builds for pre-2.0 testing
Nothing, this time I understand what you need
Re: OpenTX - Nightly builds for pre-2.0 testing
Thank you very much!
http://rc.emiter.hu/ (MegaSound 9X, GCL-2, FrSky-RSSI-DAC, etc.) Keress fel!
-
- 9x Developer
- Posts: 2764
- Joined: Fri Dec 30, 2011 11:11 pm
- Country: -
Re: OpenTX - Nightly builds for pre-2.0 testing
Thank you very much!!!bertrand35 wrote:https://github.com/opentx/opentx/commit ... 500a855999
http://rc.emiter.hu/ (MegaSound 9X, GCL-2, FrSky-RSSI-DAC, etc.) Keress fel!
Re: OpenTX - Nightly builds for pre-2.0 testing
Hy
why dont use for your hungarian language same system as for English and German and all the other the possible
subdirectory-System
sound\en
sound\de
sound\hu
sound\fr
sound\it
Helle
why dont use for your hungarian language same system as for English and German and all the other the possible
subdirectory-System
sound\en
sound\de
sound\hu
sound\fr
sound\it
Helle
Re: OpenTX - Nightly builds for pre-2.0 testing
Because it does not support FW (is not possible in Hungary).
http://rc.emiter.hu/ (MegaSound 9X, GCL-2, FrSky-RSSI-DAC, etc.) Keress fel!
Re: OpenTX - Nightly builds for pre-2.0 testing
I found a litle bug:
Timer2 countdown and say 30s, 20s, 10s, 10s, 10s, 10s, ...
Timer1 countdown good work.
FW 2.0.2
Timer2 countdown and say 30s, 20s, 10s, 10s, 10s, 10s, ...
Timer1 countdown good work.
FW 2.0.2
http://rc.emiter.hu/ (MegaSound 9X, GCL-2, FrSky-RSSI-DAC, etc.) Keress fel!
Re: OpenTX - Nightly builds for pre-2.0 testing
Sounds like you have the timer set to Beeps instead of Voice.
See here: http://www.rcgroups.com/forums/showpost ... count=1130
See here: http://www.rcgroups.com/forums/showpost ... count=1130
Sent from my Nexus 5 using TapatalkHC1969 wrote:I found a litle bug:
Timer2 countdown and say 30s, 20s, 10s, 10s, 10s, 10s, ...
Timer1 countdown good work.
FW 2.0.2
Re: OpenTX - Nightly builds for pre-2.0 testing
Same settings work differently in the two timer.
Timer1 30s, 20s, 10s, 9, 8, 7, 6, ... 0 (good)
Timer2 30s, 20s, 10s, 10s, 10s, 10s, 10s, ... (bug)
Timer1 30s, 20s, 10s, 9, 8, 7, 6, ... 0 (good)
Timer2 30s, 20s, 10s, 10s, 10s, 10s, 10s, ... (bug)
http://rc.emiter.hu/ (MegaSound 9X, GCL-2, FrSky-RSSI-DAC, etc.) Keress fel!
Re: Sv: OpenTX - Nightly builds for pre-2.0 testing
Sounds like a bug to me. I have opened an issue report on Github.HC1969 wrote:Same settings work differently in the two timer.
Timer1 30s, 20s, 10s, 9, 8, 7, 6, ... 0 (good)
Timer2 30s, 20s, 10s, 10s, 10s, 10s, 10s, ... (bug)
Re: OpenTX - Nightly builds for pre-2.0 testing
@HC1969: I can't reproduce, issue is open at https://github.com/opentx/opentx/issues/1273.
We need more data:
* your eepe file that is producing this bug
* what transmitter are you using when encountering this bug?
We need more data:
* your eepe file that is producing this bug
* what transmitter are you using when encountering this bug?
projectkk2glider@github
Re: OpenTX - Nightly builds for pre-2.0 testing
You're right, are not the same setup, but the error still is.
Please test attached file.
with me (timer2) say: 30s, 20s, 10s, 10s, 10s, ...
Please test attached file.
with me (timer2) say: 30s, 20s, 10s, 10s, 10s, ...
- Attachments
-
- document1.eepe
- (77.03 KiB) Downloaded 259 times
http://rc.emiter.hu/ (MegaSound 9X, GCL-2, FrSky-RSSI-DAC, etc.) Keress fel!
Re: OpenTX - Nightly builds for pre-2.0 testing
2.0.2 didn't fix it still getting this. After downloading 2.0.2 I can update settings and models 1 time I can read them back from tx but can't write back to tx.
Re: OpenTX - Nightly builds for pre-2.0 testing
Pretty sure this is a PC problem... Would you have an anti-virus or other stuff that could deny access to the drive?
Envoyé de mon SM-G900F en utilisant Tapatalk
Envoyé de mon SM-G900F en utilisant Tapatalk
Re: OpenTX - Nightly builds for pre-2.0 testing
It worked in 1.99 just fine it started when switching to 2.0 on.
-
- Posts: 9
- Joined: Thu May 15, 2014 8:24 pm
- Country: -
Re: OpenTX - Nightly builds for pre-2.0 testing
Is USB joystick emulation already implemented?
I can't see any device related to the taranis in my windows input devices.
Do i need a certain driver for windows 7 64bit?
---------------------------
update: working now! needed to reboot... COOL FEATURE!!!
I can't see any device related to the taranis in my windows input devices.
Do i need a certain driver for windows 7 64bit?
---------------------------
update: working now! needed to reboot... COOL FEATURE!!!
Re: OpenTX - Nightly builds for pre-2.0 testing
Same problem on Opem TX 2.02 and 2.01 with Windows 7, found it worked on computer with XP so changed Companion program compatability mode in 7 to XP SP3 and it worked.erieqc wrote:2.0.2 didn't fix it still getting this. After downloading 2.0.2 I can update settings and models 1 time I can read them back from tx but can't write back to tx.
- Scott Page
- Posts: 864
- Joined: Wed Dec 28, 2011 3:32 am
- Country: United States
- Location: Tri-Cities, Washington State
Re: OpenTX - Nightly builds for pre-2.0 testing
Friend of mine has laptop that never would allow firmware update via zadig and we spend too many sessions trying to manually do it .. jeeze. He always had access when connected turned on so could access his microSD card
So I did the 2.0 update for him on my laptop -- worked like a champ. EXCEPT now his computer won't see the Taranis at all - not even when we get the USB connected in bootloader. Updated to 2.02 bootloader.. no change. Check drive manager -- no drives seen - except we can "hear" the connection be made. Works just fine on my computer. It's a high end **** brand with all USB 3.0 drives. I've decided that his computer must have been made by Spektrum and blessed by Jeti.
No matter I'm on holiday learning to relax. Went to a "glass museum" today. I actually liked it very much.
So I did the 2.0 update for him on my laptop -- worked like a champ. EXCEPT now his computer won't see the Taranis at all - not even when we get the USB connected in bootloader. Updated to 2.02 bootloader.. no change. Check drive manager -- no drives seen - except we can "hear" the connection be made. Works just fine on my computer. It's a high end **** brand with all USB 3.0 drives. I've decided that his computer must have been made by Spektrum and blessed by Jeti.
No matter I'm on holiday learning to relax. Went to a "glass museum" today. I actually liked it very much.