Hi all,
I need one more 3-position switch, the "3POS" I've used already.
I read somewhere that it is possible to "convert" some other inputs to 3-position switches?
If so, how can this be done physically and in Companion?
Thanks
Extra 3POS switch?
Re: Extra 3POS switch?
I think you will have to install Ersky9x on your radio for that. I don't think OpenTx supports adding extra hardware..
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Extra 3POS switch?
Thanks. If I remember correctly it was related to using a switch connected to a rotary input and configuring it to work as a switch.
Anyone?
Anyone?
Re: Extra 3POS switch?
My mistake, I was thinking of this:
* 3 Pots (All three can be converted to 3 position switches)
How should I convert them to 3 position switches?
Cheers
* 3 Pots (All three can be converted to 3 position switches)
How should I convert them to 3 position switches?
Cheers
Re: Extra 3POS switch?
You need 2 resistors to define a middle level, pretty sure there's a diagram somewhere.
Then you use either the pot source as is, logical switches or the "multipos switch" feature but that will depend on what radio you have and what firmware version, you mentioned neither.
Then you use either the pot source as is, logical switches or the "multipos switch" feature but that will depend on what radio you have and what firmware version, you mentioned neither.
Re: Extra 3POS switch?
Thanks, Kilrah! I have 2.1.9, if I'am not mistaken (not able to check right now). Running on a Mega2560 Pro Mini board.