Help blocked opentx 2.2 on Taranis Q7

openTx has introduced a range of new features, ideas and bling. It is fast becoming the firmware of choice for many users. openTx will run on ALL current hardware platforms, including the gruvin9x and sky9x boards. Work has already started to support the new FrSky X9D radio!
Post Reply
Horja
Posts: 5
Joined: Thu Feb 04, 2016 10:23 am
Country: -

Help blocked opentx 2.2 on Taranis Q7

Post by Horja » Sun Mar 04, 2018 7:17 pm

I am stuck in a strange situation and I really need your help.
The radio was working fine, I have bind a x6 receiver and worked correct. After the shut down the radio does not start up.
The screen rest blocked with the opentx logo and I can't do nothing. To stop I have to take out the battery.
Tried to write the firmware and no change.
Any ideas please?
Thank you in advance
BR

User avatar
rcdiy
Posts: 171
Joined: Fri Jul 01, 2016 6:13 am
Country: Canada
Contact:

Re: Help blocked opentx 2.2 on Taranis Q7

Post by rcdiy » Sun Mar 04, 2018 7:46 pm

When you wrote the firmware did you have check compatibility selected?
Can you boot into boot loader mode? Off horizontal trims pulled to centre, on.
RCdiy.ca
Stay Safe & Have Fun
OpenTX Manual http://rcdiy.ca
Paying it forward by sharing my Lua scripts, documentation and videos.

Horja
Posts: 5
Joined: Thu Feb 04, 2016 10:23 am
Country: -

Re: Help blocked opentx 2.2 on Taranis Q7

Post by Horja » Sun Mar 04, 2018 8:00 pm

Hello
Thank you for the prompt reply
I can go into the boot mode 2.2.0
I can link to USB, I can see the SD card but I can't write and It rest stuck in USB mode even after deconnexion.
So I put the firmware on it and written with boot.
No change
i also tried to write the original firmware.
Looks like a problem in boot-loader.

User avatar
rcdiy
Posts: 171
Joined: Fri Jul 01, 2016 6:13 am
Country: Canada
Contact:

Re: Help blocked opentx 2.2 on Taranis Q7

Post by rcdiy » Sun Mar 04, 2018 8:05 pm

Anyone else got ideas?
Maybe try the Aloft Hobbies forum. They are a FrSKY repair facility and they may have seen this before.
RCdiy.ca
Stay Safe & Have Fun
OpenTX Manual http://rcdiy.ca
Paying it forward by sharing my Lua scripts, documentation and videos.

Post Reply

Return to “openTx”