Loosing calibration with my Turnigy 9XR Pro.

[anthropo]

Hello

I have a strange behaviour with my Turnigy 9XR Pro, opentTx 2.1.

And two question :
- When i power it on, sometimes the screen is pale and it take one minute to say the magic 'welcome to openTx'. Why ?
- Sometimes it looses calibration. I can't say what i did wrong, and it's limit dangerous, because my quad goes anywhere, for the trims are false. Why ?


Thank you for your responses, i need it !

[bob195558]

Hi anthropo,
Suggestion, may be try using "eePSkye" eeprom editor to flashing "erSky9x" firmware to see if you still have the same symptoms.
Find here "ersky9xr_rom.bin" (ersky9x for 9XR-PRO) and the newest PC
eeprom editor eePSkye:[/b] (http://www.er9x.com/). (Edit: fixed error)
ErSky9x directory layout for your SD card: (viewtopic.php?f=35&t=9034&p=116984#p116984).

Suggestion #2, maybe for losing stick calibration could be faulty Gimbal pots.

Bob B.

[jhsa]

Bob, Ersky9XT is for the 9xtreme board.. He has a 9XR-PRO radio, so the right firmware file is the "ersky9xr_rom.bin"

João

[anthropo]

it's the second 9XR Pro I have. The first one died... I only kept the frsky module. Is it faulty ?

[bob195558]

Thanks good catch, missed doing an edit to it, when I did a copy and paste.
I will fix my error.