OpenTX 2.2 as Slave how to setup
OpenTX 2.2 as Slave how to setup
Hi i´m a newbee with open tx and i try to setup my radio as a slave. I setup the port and i use the simulation to test everything. now my question how do i setup my mixers and inputs that if my trainer make a move he can override my commands?
thanks
thanks
Matze
Re: OpenTX 2.2 as Slave how to setup
That should be setup on the Master radio, which should be your teacher's radio. His radio should also transmit to the model.
The student radio should have a basic 4 channel setup programmed in the mixer, nothing else..
João
The student radio should have a basic 4 channel setup programmed in the mixer, nothing else..
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: OpenTX 2.2 as Slave how to setup
See
http://rcdiy.ca/wireless-trainer-link-cppm/
Where is says “Trainer Port” select the “Master/CPPM Module” Trainer Mode
Use Master/Jack or Slave/Jack
The rest of the instruction should generalize... if not let me know and I'll have to write a new guide...
http://rcdiy.ca/wireless-trainer-link-cppm/
Where is says “Trainer Port” select the “Master/CPPM Module” Trainer Mode
Use Master/Jack or Slave/Jack
The rest of the instruction should generalize... if not let me know and I'll have to write a new guide...
RCdiy.ca
Stay Safe & Have Fun
OpenTX Manual http://rcdiy.ca
Paying it forward by sharing my Lua scripts, documentation and videos.
Stay Safe & Have Fun
OpenTX Manual http://rcdiy.ca
Paying it forward by sharing my Lua scripts, documentation and videos.
Re: OpenTX 2.2 as Slave how to setup
This may be better
http://seancull.co.uk/2014/06/26/config ... tionality/
http://seancull.co.uk/2014/06/26/config ... tionality/
RCdiy.ca
Stay Safe & Have Fun
OpenTX Manual http://rcdiy.ca
Paying it forward by sharing my Lua scripts, documentation and videos.
Stay Safe & Have Fun
OpenTX Manual http://rcdiy.ca
Paying it forward by sharing my Lua scripts, documentation and videos.
Re: OpenTX 2.2 as Slave how to setup
The provided solution is for an older version of the open tx. In open tx 2.2 I don't have the master slave tab.
Matze
Re: OpenTX 2.2 as Slave how to setup
It should be here just the same.
But since we don't even know what radio you have it's a bit hard to help.
But since we don't even know what radio you have it's a bit hard to help.
Re: OpenTX 2.2 as Slave how to setup
Then yes it would be there for sure.
Re: OpenTX 2.2 as Slave how to setup
I've written a new document for setting up the trainer
Let me know of any errors, omissions and suggestions.
http://rcdiy.ca/opentx-transmitter-firm ... s/trainer/
Let me know of any errors, omissions and suggestions.
http://rcdiy.ca/opentx-transmitter-firm ... s/trainer/
Last edited by rcdiy on Fri May 18, 2018 1:24 am, edited 1 time in total.
RCdiy.ca
Stay Safe & Have Fun
OpenTX Manual http://rcdiy.ca
Paying it forward by sharing my Lua scripts, documentation and videos.
Stay Safe & Have Fun
OpenTX Manual http://rcdiy.ca
Paying it forward by sharing my Lua scripts, documentation and videos.
Re: RE: Re: OpenTX 2.2 as Slave how to setup
Thanksrcdiy wrote:I've written a new document for setting up the trainer
http://rcdiy.ca/opentx-guide/opentx-tra ... s/trainer/
Let me know of any errors, omissions and suggestions.
Matze
Re: OpenTX 2.2 as Slave how to setup
i now configured as you desciped very good description, Thanks a lot
Matze
-
- Posts: 1844
- Joined: Tue Dec 27, 2011 8:22 pm
- Country: -
- Location: Ottawa
Re: OpenTX 2.2 as Slave how to setup
The above link doesn’t seem to work.
Re: OpenTX 2.2 as Slave how to setup
RCdiy.ca
Stay Safe & Have Fun
OpenTX Manual http://rcdiy.ca
Paying it forward by sharing my Lua scripts, documentation and videos.
Stay Safe & Have Fun
OpenTX Manual http://rcdiy.ca
Paying it forward by sharing my Lua scripts, documentation and videos.
-
- Posts: 1844
- Joined: Tue Dec 27, 2011 8:22 pm
- Country: -
- Location: Ottawa
Re: OpenTX 2.2 as Slave how to setup
Thank you. Very good set of instructions.