1) openTX 2.2 Latest build ( only one day old ) crashed and burned ( Eeprom error ) deleting all settings ..
2) installing firmware as AETR does not result in AETR but rather RETA
3) Freezing on start up = Some sort of SD card issue ( Remove the SD card and looks to start ok )
Is there a stable openTX 2.2 for the Turnigy 9XR pro ?
openTX ( 9XR pro ) issues
Re: openTX ( 9XR pro ) issues
There is no stable 2.2 for anything since it's not even officially released yet...
These all seem like usage issues though, except maybe 3 since I believe that's been an occasional issue even in previous versions.
These all seem like usage issues though, except maybe 3 since I believe that's been an occasional issue even in previous versions.
Re: openTX ( 9XR pro ) issues
Cant say !
I removed all software etc from my puter !
Then downloaded everything fresh , and re installed companion 2.2 bla bla ..
Re flashed the Tx from a re formatted SD card , but installed the firmware RETA ..
And it looks to be AETR in the Tx (?)
The important thing is I can re assign function to channels ..
openTx seems to be running ok , I have 4 models in the memory , running the iRangeX IRX4 multiprotocol module .
WL toys 959 quad
Eachine H8 mini
Walkera QR W100s
and the Eachine X73 ( bit of a lemon ) - don't recommend it .
And if anyone is wondering , you can run er9x with your 9x or 9xr and use the multi module ( I am )
I removed all software etc from my puter !
Then downloaded everything fresh , and re installed companion 2.2 bla bla ..
Re flashed the Tx from a re formatted SD card , but installed the firmware RETA ..
And it looks to be AETR in the Tx (?)
The important thing is I can re assign function to channels ..
openTx seems to be running ok , I have 4 models in the memory , running the iRangeX IRX4 multiprotocol module .
WL toys 959 quad
Eachine H8 mini
Walkera QR W100s
and the Eachine X73 ( bit of a lemon ) - don't recommend it .
And if anyone is wondering , you can run er9x with your 9x or 9xr and use the multi module ( I am )
Re: openTX ( 9XR pro ) issues
Plese see comments on github since you posted in multiple places.