Turnigy 9x V2 motherboard wanted
Turnigy 9x V2 motherboard wanted
Hello all, Just curious if anyone has an unused motherboard from a turnigy 9x V2, or if someone can explain what I can use to replace the 5.1k ohm resistor I accidentally de-soldered and blew off the board never to be seen again trying to convert my TX to the trustfire mod. I have since went with a lipo pack and would like to get it back to what it was (lesson learned!!). It can be salvaged even though I ripped the copper track going from the resistor to the orange diode just above it not thinking. Don't ask me how I ripped that tiny track. Don't want to talk about it. LOL. Is there another option for me to solder a long resistor (can't think of the actual name of the type) to the board to get the battery voltage to read correctly on the TX? Or ate least point me in the direction where I don't have to buy 1000 of these things. Thanks and don't bash me too hard for my inexperience. Gotta learn somehow.
Re: Turnigy 9x V2 motherboard wanted
Hobbyking was selling an upgraded version of that board. Check there.
Enviado do meu Galaxy S6 edge, através de Tapatalk.
Enviado do meu Galaxy S6 edge, através de Tapatalk.
2x - Turnigy 9X with 9xtreme board;
2x - Turnigy 9XRpro ;
Frsky Taranis & Taranis +;
Horus x10s;
Horus x12s;
Radiomaster TX16S Max mark II.
2x - Turnigy 9XRpro ;
Frsky Taranis & Taranis +;
Horus x10s;
Horus x12s;
Radiomaster TX16S Max mark II.
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: Turnigy 9x V2 motherboard wanted
Also this may be of help (http://www.ebay.com/itm/100pcs-5-SMD-Ch ... 3ab10d60f0).
Or (http://www.ebay.com/itm/5-1K-OHM-2-WATT ... 4aefc19305)
Bob B.
Or (http://www.ebay.com/itm/5-1K-OHM-2-WATT ... 4aefc19305)
Bob B.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
Re: Turnigy 9x V2 motherboard wanted
Bob, That's exactly what I was looking for in the 2nd link. PERFECT!! Thanks so much for finding that for me!!
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: Turnigy 9x V2 motherboard wanted
Glad to be of help, hope you will be able to restore your 9x back to good working order.
Bob B.
Bob B.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).