Module for infrared controls?
Module for infrared controls?
I'm just curious how 'universal' these can be made to be, and if anyone's done a module for IR or other controls?
I don't know how the innards work, but there are reports and videos of IR-controlled indoor helicopters (like the Syma S107G) being controlled via computer/arduino, and for me it would be very handy to just have 'my radio' to control everything I want to control.
Maybe the subset of n3rds like me who want this is too small to make it worthwhile. I may just have to learn enough to make one myself eventually...
I don't know how the innards work, but there are reports and videos of IR-controlled indoor helicopters (like the Syma S107G) being controlled via computer/arduino, and for me it would be very handy to just have 'my radio' to control everything I want to control.
Maybe the subset of n3rds like me who want this is too small to make it worthwhile. I may just have to learn enough to make one myself eventually...
- cre8tiveleo
- Posts: 1434
- Joined: Tue Dec 27, 2011 6:13 pm
- Country: -
- Location: Ontario,(GTA North)
- Contact:
Re: Module for infrared controls?
THere are a few threads already on 9xforums that discuss this,
Yes you can, use the ppm out , er9x used to have the it code to support it, not anymore.
Yes you can, use the ppm out , er9x used to have the it code to support it, not anymore.
Re: Module for infrared controls?
Sorry, I've used the search to look for infrared, but the few results I get don't seem relevant.
I've looked for IR, but the search term is too short.
Since there are so many different versions of IR I wasn't sure what else to search for, hence my question.
Sorry if I'm making newbie mistakes with things, but would you mind pointing me in the correct direction?
Thanks.
I've looked for IR, but the search term is too short.
Since there are so many different versions of IR I wasn't sure what else to search for, hence my question.
Sorry if I'm making newbie mistakes with things, but would you mind pointing me in the correct direction?
Thanks.
Re: Module for infrared controls?
AFAIK, infrared protocols were removed when DSM/Pxx protocols were added.
In the hex codes look for strings like Silv, Asilv, Bsilv, Ctrac.
I think that Silv relates to the Silverlit protocol.
I have several fw version saved on my pc and found it in firmware version 546 and lower. It is no more available in versions 638 and up. So it was removed somewhere in between.
Reinhard
In the hex codes look for strings like Silv, Asilv, Bsilv, Ctrac.
I think that Silv relates to the Silverlit protocol.
I have several fw version saved on my pc and found it in firmware version 546 and lower. It is no more available in versions 638 and up. So it was removed somewhere in between.
Reinhard
-
- 9x Developer
- Posts: 2764
- Joined: Fri Dec 30, 2011 11:11 pm
- Country: -
Re: Module for infrared controls?
I think they have been removed from er9x for saving flash. Do you need it? Would you be ok to test it in open9x? With our options system, it will be easy to re-enable it again.
Bertrand.
Bertrand.
Re: Module for infrared controls?
That's exactly what I was thinking
-
- 9x Developer
- Posts: 2764
- Joined: Fri Dec 30, 2011 11:11 pm
- Country: -
Re: Module for infrared controls?
But I will do only if somebody agrees for testing the feature.
Bertrand.
Bertrand.
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: Module for infrared controls?
Only 'limit' I believe is that the protocols are only for silverlit A/B/C. Not sure how much that limits against the variety of infrared heli's?
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
Re: Module for infrared controls?
Well if the base is in, more could be added...
I probably still have a picooz around
I probably still have a picooz around
Re: Module for infrared controls?
I found another thread through searching for LEDs, so just for my own interest I'll link it here: viewtopic.php?f=25&t=244
Reading that thread lead me to this link (posted with video in the previous thread): http://forum.rcdesign.ru/f59/thread223818.html
Working through the seemingly-terrible Google Translation of the above Russian post led to this link: http://www.open.com.au/mikem/arduino/IRrc/
So it looks like it's not only possible but has been done already... makes me wonder when an intrepid entrepreneur will take my money for one.
Looks like I may have added something else to my 'to do' list!
Reading that thread lead me to this link (posted with video in the previous thread): http://forum.rcdesign.ru/f59/thread223818.html
Working through the seemingly-terrible Google Translation of the above Russian post led to this link: http://www.open.com.au/mikem/arduino/IRrc/
So it looks like it's not only possible but has been done already... makes me wonder when an intrepid entrepreneur will take my money for one.
Looks like I may have added something else to my 'to do' list!
Re: Module for infrared controls?
Yes, I know this thread is ooooold, but one of the members on this board has done such a wonderful project on this I just had to let you all know:
viewtopic.php?f=26&t=2450
viewtopic.php?f=26&t=2450