tactic Anylink2...which cable?

Choosing an RF Module? What modules work? What is compatible with the 9x?
Post Reply
dereke358
Posts: 2
Joined: Thu May 11, 2017 4:36 am
Country: -

tactic Anylink2...which cable?

Post by dereke358 » Thu May 11, 2017 4:44 am

I am in the process of converting my rc fleet from Tactic to FrSky (hopefully). I bought a used 9x to convert to frsky and OpenTX. I bought a tactic anylink2 for some of my planes that have the tactic receiver more or less permanently installed....anyway, which of the included Anylink2 cables do I use? The "A" cable for Spektrum/JR (where the polarity is reversed on the DSC port) or the "C" cable ( for the DX6i, Hitecs)


thoughts? i've been searching for hours and haven't found anyone that used the anylink2 with a 9x

User avatar
Kilrah
Posts: 9451
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: tactic Anylink2...which cable?

Post by Kilrah » Thu May 11, 2017 8:11 am

Most likely A... but what about trying and seeing which works?

dereke358
Posts: 2
Joined: Thu May 11, 2017 4:36 am
Country: -

Re: tactic Anylink2...which cable?

Post by dereke358 » Thu May 11, 2017 1:53 pm

I think I figured it out (I dont have the 9x in hand yet) since the 9x trainer cord is straight polarity (pin/pin and shield/shield)....so cable C should be it

Post Reply

Return to “RF MODULES”