Programming for eachine QX95
Programming for eachine QX95
Hi, I bought that quadr, but I do not know how to put channel 5 to build engines, I would appreciate if you could help me, my station is Flysky TH9x with er9x, help please, if there was a template or programming cli for the cleanflight would be perfect. Thank you very much. [email protected]
-
- Posts: 1844
- Joined: Tue Dec 27, 2011 8:22 pm
- Country: -
- Location: Ottawa
Programming for eachine QX95
Go to the Mixer Page.
Select CH5.
In the Edit Mix page choose a Source.
Source for your purposes can be a pot or a two or three position switch.
If you choose a switch as the source, leave the Switch item blank.
Note that how the source choices are presented depends on the version of ER9X.
For the ER9X manual, which gives full detail, go to er9x.com.
Select CH5.
In the Edit Mix page choose a Source.
Source for your purposes can be a pot or a two or three position switch.
If you choose a switch as the source, leave the Switch item blank.
Note that how the source choices are presented depends on the version of ER9X.
For the ER9X manual, which gives full detail, go to er9x.com.