newbee,
my HK ASK21 Mi glider is here, and my Turnigy 9X with FrSky is in the mail, I'm going to flash to er9X
HK ASK21 Mi is the glider with the 'popup' engine behind the canopy, that has 3 positions,
down stored, halfway for milling prop to brake stop, up,
this really goes with too fast a speed (bang)
I saw a youtube, someone showing HK ASK21 Mi on '3 POS switch',
DOWN, stored, to MID, slow! movement to MID, to UP, up position, and
back MID, slow! retract to half point, DOWN store
anyone can tell me how to program this with er9X,
or the general direction to accomplish this,
cannot find this anywhere explained
thx
howto HK ASK21 Mi - slow! - engine pop-up on '3 POS switch'?
Re: howto HK ASK21 Mi - slow! - engine pop-up on '3 POS swit
Sounds like this is a candidate for a curve of five points or more, using a standard two position switch.
Not knowing this glider at all. Does it have any mechanical switches that is part of the system?
Not knowing this glider at all. Does it have any mechanical switches that is part of the system?
Re: howto HK ASK21 Mi - slow! - engine pop-up on '3 POS swit
I remember someone doing something similar a while ago.. try searching the forum.. He also had a glider with retractable motor..
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- MikeB
- 9x Developer
- Posts: 17990
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: howto HK ASK21 Mi - slow! - engine pop-up on '3 POS swit
You can use the 3 position switch (3POS) as the source of a mix. The output channel is then at one end, in the middle or at the other end. In the mix you can also specify a slow up and/or down.
If you have not already done so, download and install eepe. This will let you experiment with setting up mixes before you get your Tx and re-flash it. You will be able to transfer any model setups you create on eepe onto the radio.
Mike.
If you have not already done so, download and install eepe. This will let you experiment with setting up mixes before you get your Tx and re-flash it. You will be able to transfer any model setups you create on eepe onto the radio.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: howto HK ASK21 Mi - slow! - engine pop-up on '3 POS swit
the search in this forum doesnt seem to except 'quotations'jhsa wrote:I remember someone doing something similar a while ago.. try searching the forum.. He also had a glider with retractable motor..
João
so 'ask 21 mi' starts to generate hundreds of hits with 'ask'
'dg 1000', the model where the motorpod design came from,
outputs, 'dg' ignored
duh
Re: howto HK ASK21 Mi - slow! - engine pop-up on '3 POS swit
it is a DG 1000 clone by HK, wingspan 2023Flaps 30 wrote:Sounds like this is a candidate for a curve of five points or more, using a standard two position switch.
Not knowing this glider at all. Does it have any mechanical switches that is part of the system?