Expo/dr F.mode

[ARMAGUEDON]

hello everyone
I wonder if one of you has already done a mix F, Mode 3 positions for three different TRAVEL 0 = low, 1 = medium 2 = high with er9x
please thank you

[ARMAGUEDON]

I found my mixes but I have a problem to change the values ​​- → ← example on my line ELE

exp % sw1 sw2
ELE 0 25 (→) ! ID2 ! ID1

I want to change the value in ()
thank you

[MikeB]

Move the corresponding control stick, the arrow indicates which side you are editing.

Mike.

[ARMAGUEDON]

Hi mike
I'm trying my line but the principle remains ELE → with value instead of --
I look at my other model aircraft and the value is always on ELE → maybe I did not corect what?
An idea?

[Kilrah]

Are you sure your mode setting is correct in the radio settings? Mode 1 instead of mode 2 (or vice versa) would expect elevator on the other stick.

[gohsthb]

If you have different values from one side to the other, you can't get rid of the arrow. Move the stick to both sides and check that the values are the same.
-Gohst

[ARMAGUEDON]

Yes I am in mode 2 works well in my mixes F.ModE
ido0=L
ido1= M
ido2=H
I try on my plane but just cursed problem has dug himself head

[ARMAGUEDON]

This is not really serious TelemetrEZ I expect one day to another and FrSky DJT module and flash can be set to r782 small problem thank you thank you to all

[Kilrah]

Sorry but it's really difficult to understand you.
If you speak French, essayez peut-être en Français? Il y a quelques francophones ici...