er9x help please

Programming your 9x using the stock firmware that comes with the radio. (Note. This is for the th9x, not the X9R)
Post Reply
routemaster88
Posts: 2
Joined: Sun Feb 02, 2014 2:14 pm
Country: -

er9x help please

Post by routemaster88 »

Hello can anybody help me as i a trying to find how to reverse a servo for the elevator.I have looked on the transmitter but can not see anything in any of the menu settings plus gone through the manual cant seem to find help there either.I know there must be away so i am an sure i am missing something simple (the transmitter is the flysky 9x with er9x firmware)
Thanks

User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: er9x help please

Post by jhsa »

press right key long to enter model select menu, then keep short pressing the right key until you find the "Limits" menu. scroll down to the channel you want to reverse. press right to go to the end of the line. there is "---"
Now press menu once and it will change to "INV"
the channel is then reversed.

I hope it helps.

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
routemaster88
Posts: 2
Joined: Sun Feb 02, 2014 2:14 pm
Country: -

Re: er9x help please

Post by routemaster88 »

yes it did help thank you very much Joao.

Post Reply

Return to “stock firmware (fly sky th9x)”