9XR Pro - XJT Telemetry Cable
9XR Pro - XJT Telemetry Cable
I have ordered a telemetry cable from ebay which arrived today. I am not sure how to connect the cable to my XJT module.
As seen in below picture, the XJT module features 4pin port for telemetry, and 3pin smart port. The cable I have is a 3 prong cable. Can you help me identify which pins and what order do I need to connect the cable?
As seen in below picture, the XJT module features 4pin port for telemetry, and 3pin smart port. The cable I have is a 3 prong cable. Can you help me identify which pins and what order do I need to connect the cable?
Last edited by erayymz on Sat Dec 19, 2015 12:17 am, edited 1 time in total.
Re: 9XR - XJT Telemetry Cable
Do you have a 9XR or a 9XR-PRO?
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: 9XR Pro - XJT Telemetry Cable
It is Pro.
Re: 9XR Pro - XJT Telemetry Cable
If it is the pro you don't need that cable.. you just need to update the firmware to the latest ersky9x.
The latest version supports the XJT module without any cables or modifications. Do you still have the stock firmware installed?
João
The latest version supports the XJT module without any cables or modifications. Do you still have the stock firmware installed?
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: 9XR Pro - XJT Telemetry Cable
I have updated it when i got it. It is running ersky9x-217. Ot is mike version.
Re: 9XR Pro - XJT Telemetry Cable
So then forget the cable.. The XJT is already connected using pin5 of the module bay and you can have telemetry displayed on the radio.
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: 9XR Pro - XJT Telemetry Cable
Lol I don't need this [emoji37]
Sent from my iPhone using Tapatalk
Re: 9XR Pro - XJT Telemetry Cable
With the XJT? Nope
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: 9XR Pro - XJT Telemetry Cable
I need some help on this too. I've tried everything I can come up with. I have 9XR Pro with updated firmware to 217. I have the XJT and the X8R with smart port. I have the Voltage sensor and GPS with Smart port. The only time I get any reading from the receiver to my 9XR Pro is under PPM D16 with the cable attached and I get the RSSI reading. I get nothing from the Volt Sensor or GPS. Please help. Thanks.
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: 9XR Pro - XJT Telemetry Cable
Do you mean PPM D16, or PXX D16?
What cable do you have attached? The XJT needs no cables as it connects directly via the bottom pin of the module connector.
Mike.
What cable do you have attached? The XJT needs no cables as it connects directly via the bottom pin of the module connector.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: 9XR Pro - XJT Telemetry Cable
I switched to PXX D16. Switched to using SBUS from CC3D board to X8R receiver. I still can't figure it out.
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: 9XR Pro - XJT Telemetry Cable
The internal connection from the XJT is on COM1, so make sure you have that set in the telemetry menu, COM2 is for the external cable.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
-
- Posts: 7
- Joined: Thu Sep 25, 2014 12:49 am
- Country: -
Re: 9XR Pro - XJT Telemetry Cable
Hello,
I have à 9xr pro since long time but I can't use telemetry by the xjt with com 1 ,no working.
With a câble ,no problem !!!
I have à 9xr pro since long time but I can't use telemetry by the xjt with com 1 ,no working.
With a câble ,no problem !!!
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: 9XR Pro - XJT Telemetry Cable
Do you have the protocol set to PXX (protocol menu), and do you have "Invert COM1" set to OFF in the telemetry menu?
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!