I have recently upgraded my remote controller after scoring a nice deal from hobbyking. Got myself following kit:
Note: I am using this for a hexacopter with NazaM V2.
- Turnigy 9XR Pro (running ersky9xr_v217)
- FrSky DF 2.4Ghz Combo Pack for JR w Module & RX (http://www.ebay.com/itm/281584406057?_t ... EBIDX%3AIT)
Here is how the channels currently mapped:
Code: Select all
CH1 AIL (Right Stick)
CH2 ELE (Right Stick)
CH3 THR (Left Stick)
CH4 RUD (Left Stick)
CH5 NAZA IOC (GEA SW: IOC On/Off, AIL SW: Home Lock, Course Lock)
CH6 NAZA FLIGHT MODE (RUD SW: Failsafe, ID0/1/2: GPS, ATTI, MAN)
CH7
CH8
Now as you can see, I have two remaining channels left. However, I still have following devices in the aircraft that I need to control with following respective switches.
- 3 Axis Gimbal: P1 Switch to control pitch & P3 switch to control yaw. RX connects directly to gimbal.
- Video Switcher: ELE Switch to switch between GoPro, and FPV camera. RX connects directly to switcher.
- Light Switcher: P2 Switch to control lights. 0% position OFF, 50% position "strobes on", 100% position "strobes and leds on" RX connects directly to switcher.
Code: Select all
ELE SW CAMERA SWITCH PFV - GOPRO
P1 GIMBAL PITCH
P3 GIMBAL YAW
P2 LIGHT CONTROL OFF - STROBE - LED+STROBE
ID0/1/2 GPS - ATTI - MANUAL
AIL SW HOME LOCK - COURSE LOCK
RUD SW FAILSAFE OFF - ON
THR SW THR LOCK (ARM - DISARM)
GEA SW IOC OFF - ON
TRN SW UNUSED