Dear Group,
I have installed the ER9X firmware, and want to transfer a complete set of parameters from one radio to another.
I found the "Read Memory from Tx" button, but when I hit it I get errors:
avrdude.exe: warning: cannot set sck period. please check for usbasp firmware update.
avrdude.exe: error: programm enable: target doesn't answer. 1
avrdude.exe: initialization failed, rc=-1
Double check connections and try again, or use -F to override
this check.
What do I need to do?
Thanks!
Mike
FlySky ER9X/eepe Parameter Transfer?
Re: FlySky ER9X/eepe Parameter Transfer?
Well. For a start DO NOT USE THE -F OPTION. It can brick your radio. Now, what programmer do you have? The SCK error makes me think you have a usbasp programmer. Did it ever work? What radio are you trying to read? Did you ever read or flash this radio successfully?
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: FlySky ER9X/eepe Parameter Transfer?
You may safely ignore the "cannot set sck period." message.
And in addition, it says, that AVRdude correctly recognizes your programmer.
But obviously the programmer can't correctly talk to the processor.
So really carefully check the connections between programmer and processor.
You may upload some high resolution pictures from the connections between the programmer and the processor.
Some of the programmers may have a signal on one pin that normally is stated as ground
And, as Joao said, NEVER use the -F option of AVRDude.
Reinhard
And in addition, it says, that AVRdude correctly recognizes your programmer.
But obviously the programmer can't correctly talk to the processor.
So really carefully check the connections between programmer and processor.
You may upload some high resolution pictures from the connections between the programmer and the processor.
Some of the programmers may have a signal on one pin that normally is stated as ground
And, as Joao said, NEVER use the -F option of AVRDude.
Reinhard
- KAL
- Posts: 552
- Joined: Thu Oct 10, 2013 4:36 pm
- Country: Germany
- Location: somewhere near Rothenburg ob der Tauber
Re: FlySky ER9X/eepe Parameter Transfer?
In addition to Reinhards post a little image:don't use pins 4 or 6 of the USBASP for ground as other images show:
To be on the safe side use pin 8 or 10 for ground!
Klaus
Please make shure you To be on the safe side use pin 8 or 10 for ground!
Klaus
( TH9X / 9XTreme / FrSky DHT / Spektrum / Multi / RotEnc )
( 9XR PRO / erSKY9x / FrSky DHT / Spektrum / Multi / RotEnc / P3 as Slider )
( 9XR PRO / erSKY9x / FrSky DHT / Spektrum / Multi / RotEnc / P3 as Slider )
Re: FlySky ER9X/eepe Parameter Transfer?
Hi Group!
Thanks for the replys.
I have successfully flashed the firmware with this USB programmer: USBasp USBISP AVR 10 Pin USB Programmer 3.3V/5V 51 ATMEGA8 w/ Cable & adapter
The firmware and radio are working fine
It is wired as per above 6 Pin diagram.
Thanks guys!
Thanks for the replys.
I have successfully flashed the firmware with this USB programmer: USBasp USBISP AVR 10 Pin USB Programmer 3.3V/5V 51 ATMEGA8 w/ Cable & adapter
The firmware and radio are working fine
It is wired as per above 6 Pin diagram.
Thanks guys!
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: FlySky ER9X/eepe Parameter Transfer?
Did you flash using eepe, but still can't read back the model memory?
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: FlySky ER9X/eepe Parameter Transfer?
That is correct.
Thanks Mike!
Thanks Mike!
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: FlySky ER9X/eepe Parameter Transfer?
If you used the USBASP to flash er9x, then it should work to read the EEPROM as it is making exactly the same connections.
At this point I can only suggest checking all wiring and connections are correct and nothing has become disconnected since flashing er9x.
Mike.
At this point I can only suggest checking all wiring and connections are correct and nothing has become disconnected since flashing er9x.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!