orange-x 3-axis

Programing help and example for all firmwares based on thus's th9 firmware.
Post Reply
ries
Posts: 5
Joined: Sat Jul 27, 2013 3:54 pm
Country: -

orange-x 3-axis

Post by ries »

Hallo,

ich bin leider der engl. Sprache nicht besonders mächtig, daher versuche ich es mal in deutsch.
Ich möchte gerne das Empfängermodul "orange-x 3-axis" in der 9xr auf einen Schalter legen. orange-x 3-axis empfiehlt dafür Kanal 6 zu verwenden. Wer kann mir hier weiter helfen?


m.f.G.

Ruppert

User avatar
Bill
Posts: 195
Joined: Thu Jul 04, 2013 5:54 pm
Country: -

Re: orange-x 3-axis

Post by Bill »

Es ist nicht wichtig, welchen Kanal Sie verwenden, können Sie den Schalter auf welchem ​​Kanal Sie zuordnen. Sie fragen nach genauen Anweisungen, wie man die Schalter eingerichtet?
“A good politician is quite as unthinkable as an honest banker”
They used to say "if you don’t want to work at McDonald’s, go to college." Now they say "if you want to work at McDonald’s, go to college.”
ries
Posts: 5
Joined: Sat Jul 27, 2013 3:54 pm
Country: -

Re: orange-x 3-axis

Post by ries »

ja, danke für das Feedback,

ich habe im Verz. "Mischer" auf CH6 den Schalter "AIL" aktiviert. Leider zeigt das 3-Axis-Modul keine Reaktion. Was kann ich noch machen?

Yes, thank you for this opinion, I have in the dir. \"Mixer\" on CH6 activates the switch \"QR\". Unfortunately, 3-axis module that shows no reaction. Was I can still do?


m.f.G.

Ruppert
ries
Posts: 5
Joined: Sat Jul 27, 2013 3:54 pm
Country: -

Re: orange-x 3-axis

Post by ries »

ich habe das Problem gelöst.
Das Manual von Orange-x benennt den CH6 als den Kanal für die Kreiselaktivierung, tatsächlich ist es aber CH5.
User avatar
Bill
Posts: 195
Joined: Thu Jul 04, 2013 5:54 pm
Country: -

Re: orange-x 3-axis

Post by Bill »

Handbücher!
“A good politician is quite as unthinkable as an honest banker”
They used to say "if you don’t want to work at McDonald’s, go to college." Now they say "if you want to work at McDonald’s, go to college.”

User avatar
Bill
Posts: 195
Joined: Thu Jul 04, 2013 5:54 pm
Country: -

Re: orange-x 3-axis

Post by Bill »

Handbücher!
“A good politician is quite as unthinkable as an honest banker”
They used to say "if you don’t want to work at McDonald’s, go to college." Now they say "if you want to work at McDonald’s, go to college.”

Post Reply

Return to “er9x / gruvin9x / th9 based firmwares”