Can you help me to setup the 3 switch with the modes on the Blade 350QX?
regards.
Blade 350QX Mode settings
-
- Posts: 9
- Joined: Wed Sep 18, 2013 10:10 pm
- Country: -
Re: Blade 350QX Mode settings
I tryed myseld i i got it working.
Settings er9x for the 350QX: https://dl.dropboxusercontent.com/u/135 ... .350qx.zip
With throttle cut and GEAR switch is RTH, 3 switch position is the flight modes.
Settings er9x for the 350QX: https://dl.dropboxusercontent.com/u/135 ... .350qx.zip
With throttle cut and GEAR switch is RTH, 3 switch position is the flight modes.
-
- Posts: 2
- Joined: Fri Dec 05, 2014 11:17 am
- Country: -
Re: Blade 350QX Mode settings
Hi,
I've got not only the 9xr working well with the 350 QX (2), but also stagility mode.
The details are here https://www.dropbox.com/s/fkusrfajedcvg ... x.zip?dl=0
THR: cuts the engines.
GEA: Return to Home.
3POS: SAFE, AP, and Stability Mode
AIL: Stagility Mode
RUD: Backlight for Tx
To enter Stagility mode, start in Stability mode, then turn AIL ON.
I've got not only the 9xr working well with the 350 QX (2), but also stagility mode.
The details are here https://www.dropbox.com/s/fkusrfajedcvg ... x.zip?dl=0
THR: cuts the engines.
GEA: Return to Home.
3POS: SAFE, AP, and Stability Mode
AIL: Stagility Mode
RUD: Backlight for Tx
To enter Stagility mode, start in Stability mode, then turn AIL ON.
Re: Blade 350QX Mode settings
Hi,
I've just come across your settings and the files seem not to be ther anymore.
As I am in a very similar setting as you,could you pls make them available again ?
Thanks a lot
I've just come across your settings and the files seem not to be ther anymore.
As I am in a very similar setting as you,could you pls make them available again ?
Thanks a lot
Re: Blade 350QX Mode settings
same here dead links killed my excitement lol