Blade 350QX Mode settings

Programing help and example for all firmwares based on thus's th9 firmware.
Post Reply
GhostMasterPT
Posts: 9
Joined: Wed Sep 18, 2013 10:10 pm
Country: -

Blade 350QX Mode settings

Post by GhostMasterPT »

Can you help me to setup the 3 switch with the modes on the Blade 350QX?

regards.

GhostMasterPT
Posts: 9
Joined: Wed Sep 18, 2013 10:10 pm
Country: -

Re: Blade 350QX Mode settings

Post by GhostMasterPT »

I tryed myseld i i got it working.

Settings er9x for the 350QX: https://dl.dropboxusercontent.com/u/135 ... .350qx.zip

With throttle cut and GEAR switch is RTH, 3 switch position is the flight modes.
cschladetsch
Posts: 2
Joined: Fri Dec 05, 2014 11:17 am
Country: -

Re: Blade 350QX Mode settings

Post by cschladetsch »

Hi,

I've got not only the 9xr working well with the 350 QX (2), but also stagility mode.

The details are here https://www.dropbox.com/s/fkusrfajedcvg ... x.zip?dl=0

Image

Image

THR: cuts the engines.
GEA: Return to Home.
3POS: SAFE, AP, and Stability Mode
AIL: Stagility Mode
RUD: Backlight for Tx

To enter Stagility mode, start in Stability mode, then turn AIL ON.
InTheAir
Posts: 1
Joined: Sat Nov 14, 2015 6:19 pm
Country: -

Re: Blade 350QX Mode settings

Post by InTheAir »

Hi,

I've just come across your settings and the files seem not to be ther anymore.
As I am in a very similar setting as you,could you pls make them available again ?
Thanks a lot
User avatar
Dbswans
Posts: 101
Joined: Fri Dec 25, 2015 12:06 am
Country: -

Re: Blade 350QX Mode settings

Post by Dbswans »

same here dead links killed my excitement lol

Post Reply

Return to “er9x / gruvin9x / th9 based firmwares”