Video Guides on how to program your er9x/gruvin firmware

Programing help and example for all firmwares based on thus's th9 firmware.
Post Reply
User avatar
Rob Thomson
Site Admin
Posts: 4543
Joined: Tue Dec 27, 2011 11:34 am
Country: United Kingdom
Location: Albury, Guildford
Contact:

Video Guides on how to program your er9x/gruvin firmware

Post by Rob Thomson »

A number of guides on how to program your er9x/gruvin/th9 based firmware where put together by richardmrazek

These guides are extremely educational and well worth watching.

Please note that the software is continually evolving and it is quite possible that if you are on a different firmware version, some details will have changed. Differences are not likely to affect your understanding of the video or new firmware.

Lesson One
http://www.youtube.com/watch?v=q2UT1pFcYhM

Lesson Two
http://www.youtube.com/watch?v=vpgGnb1ROP8

Lesson Three
http://www.youtube.com/watch?v=EjJMgR41GKc

Lesson Four
http://www.youtube.com/watch?v=_vwQOaYqvSo
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!

wilco1967
Posts: 33
Joined: Tue Dec 27, 2011 8:20 pm
Country: -
Location: Winterswijk

Re: Video Guides on how to program your er9x/gruvin firmware

Post by wilco1967 »

Here´s another one showing the USBasp cable installation to flash ER9X

http://www.youtube.com/watch?v=2Yv2rCxf ... plpp_video
Post Reply

Return to “er9x / gruvin9x / th9 based firmwares”