Ersky9x 221f3, Qx7, Inactivity alarm not working

Programing help and example for all firmwares based on thus's th9 firmware.
Post Reply
interestingfellow
Posts: 176
Joined: Tue Jun 16, 2015 2:05 am
Country: United States
Location: durham, nc

Ersky9x 221f3, Qx7, Inactivity alarm not working

Post by interestingfellow » Fri Nov 03, 2017 8:50 pm

I have ErSky9x 221 F3 running on a qx7 and my inactivity alarm will not sound off. All my other voices and alarms work and sound. I have adjusted the length of time for the inactivity timer, with no success. What else should I look at?

User avatar
jhsa
Posts: 17716
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Ersky9x 221f3, Qx7, Inactivity alarm not working

Post by jhsa » Fri Nov 03, 2017 9:22 pm

There should be a setting for the inactivity alarm volume..

Sent from my BLN-L21 using Tapatalk

My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

interestingfellow
Posts: 176
Joined: Tue Jun 16, 2015 2:05 am
Country: United States
Location: durham, nc

Re: Ersky9x 221f3, Qx7, Inactivity alarm not working

Post by interestingfellow » Sat Nov 04, 2017 9:55 pm

set for 1minute and volume to 23.
doesnt work....
and I checked that the volume control was set to radio setup menu, and not a pot for that model

User avatar
jhsa
Posts: 17716
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Ersky9x 221f3, Qx7, Inactivity alarm not working

Post by jhsa » Sat Nov 04, 2017 10:20 pm

Please go to the "Radio Setup / DiagAna" menu, an check the numbers on the first 4 lines.. They are the sticks analog values. are they constantly changing when you are not moving the sticks?

João

EDIT: Also check in the SD Card Voice/System folder if there is a file called "INACTV.wav"
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

interestingfellow
Posts: 176
Joined: Tue Jun 16, 2015 2:05 am
Country: United States
Location: durham, nc

Re: Ersky9x 221f3, Qx7, Inactivity alarm not working

Post by interestingfellow » Sun Nov 05, 2017 1:36 am

I had noticed that they do, already.
Now that I'm thinking about it, the back light never cuts off either.


User avatar
jhsa
Posts: 17716
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Ersky9x 221f3, Qx7, Inactivity alarm not working

Post by jhsa » Sun Nov 05, 2017 1:54 am

Please go to the Radio Setup / Hardware Menu and make sure "filter ADC" is set to OSMP.
To enable the hardware menu turn the radio ON while holding the left horizontal trim to the left for a second.

Also, did you check the voice file I mentioned above is on the SD Card?
You could also post your radio's eeprom here so we could have a look

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

interestingfellow
Posts: 176
Joined: Tue Jun 16, 2015 2:05 am
Country: United States
Location: durham, nc

Re: Ersky9x 221f3, Qx7, Inactivity alarm not working

Post by interestingfellow » Sun Nov 05, 2017 2:29 am

OSMP, yes.

I was on my phone earlier and didn't see the SD card bit.
I just checked and there is in fact NO INACTIV.wav on my sd card. I did generate my own voice file from TTSautomate. I'll copy over missing files and report back

THANK YOU! (again!)

interestingfellow
Posts: 176
Joined: Tue Jun 16, 2015 2:05 am
Country: United States
Location: durham, nc

Re: Ersky9x 221f3, Qx7, Inactivity alarm not working

Post by interestingfellow » Sun Nov 05, 2017 3:39 am

Yep, the missing file is what was the problem.

Thanks, once again, Jhsa!

User avatar
jhsa
Posts: 17716
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Ersky9x 221f3, Qx7, Inactivity alarm not working

Post by jhsa » Sun Nov 05, 2017 3:41 am

Good that is working..
You mentioned the backlight earlier??

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

Post Reply

Return to “er9x / gruvin9x / th9 based firmwares”