V977 setup Template

Programing help and example for all firmwares based on thus's th9 firmware.
Post Reply
larezwarez
Posts: 12
Joined: Fri Jul 21, 2017 6:36 pm
Country: -

V977 setup Template

Post by larezwarez »

Well, thank´s everybody for helping out on this forum, it´s great!
Need some help with er9x to set up my wltoys V977 to work.
Does someone have a template for this or can explain it how to set it up!
Hope there is someone out there that´s flying a v977 with Er9x or opentx!
Have a good one!

User avatar
ipreventdeath
Posts: 13
Joined: Wed Sep 06, 2017 3:26 am
Country: United States
Contact:

Re: V977 setup Template

Post by ipreventdeath »

I posted an eepm file for the V977 in this thread.

viewtopic.php?f=94&t=8954&p=116197&hili ... pm#p116197

The setting are identical for the V950. There are sequencing steps involved for proper function of all settings with both the V977 and the V950. I believe this is generally where people are having issues. Even with the WL Toys stock transmitter, 3D mode must be enable for idle up to function properly. 3D flight requires both settings to be engaged.
larezwarez
Posts: 12
Joined: Fri Jul 21, 2017 6:36 pm
Country: -

Re: V977 setup Template

Post by larezwarez »

never mind
larezwarez
Posts: 12
Joined: Fri Jul 21, 2017 6:36 pm
Country: -

Re: V977 setup Template

Post by larezwarez »

Here is a link for some pictures of his settings.
The way he has setup his switches is for his liking!
I have made the same settings in my TGY9x with er9x and theres a link to the model settings file for eepe (not eepesky)
Well most of the settings works except for the pith up, i must have almost full throttle to hover but the negative pitch is allright.
Anny suggestions?
viewtopic.php?f=94&t=8954&p=131929#p131929

Her is a link to a pdf file that shows my settings for v977 and v950 v977_v950_pdf

Post Reply

Return to “er9x / gruvin9x / th9 based firmwares”