How to set alarms on A1/A2?

Programing help and example for all firmwares based on thus's th9 firmware.
Post Reply
darzur
Posts: 8
Joined: Thu Apr 26, 2012 4:10 am
Country: -
Location: Wroclaw, POLAND

How to set alarms on A1/A2?

Post by darzur » Sun May 07, 2017 4:34 pm

Hi,

Few days ago bought XJT and today finished telemetry mod in my 9x. Everything works but I'm total newbie on telemetry area so have few questions.

* how to set audible warnings on A1/A2 voltages? There is no option for that in Tx menu. For me it's a basic functionality to be able to hear when battery goes low.
* what are TxRSSIalrm and RxRSSIalrm? Are they just two alarm thresholds for RSSI? I can set there yellow, orange and red and some value, but it all is unclear to me. It will be logical to set two alarm thresholds on RSSI but don't know how to do it...

P.S. I'm using er9x for M64-FrSky rev. 821. Protocol is XJT, D8, 8ch.
--
regards
darzur

User avatar
MikeB
9x Developer
Posts: 15650
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: How to set alarms on A1/A2?

Post by MikeB » Sun May 07, 2017 10:30 pm

First off, have you read this manual: viewtopic.php?f=5&t=6473#p90349?

Mike.
ersky9x/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

darzur
Posts: 8
Joined: Thu Apr 26, 2012 4:10 am
Country: -
Location: Wroclaw, POLAND

Re: How to set alarms on A1/A2?

Post by darzur » Mon May 08, 2017 4:08 am

Now I did. :) Thanks. It was a bit misleading, as I don't have voice module installed but figured it out in the end.
--
regards
darzur

Post Reply

Return to “er9x / gruvin9x / th9 based firmwares”