openrcforums

I'm trying to figure out the control option in the opening its giving me all option except the one for ppm in the control radio settings its not there is there something Im not doing or is it the firmware what can it possibly be I cant figure it out

Please don't double post.. Be a bit more patient Someone will answer your questions

Mike already answered you here..

viewtopic.php?f=3&t=8555&view=unread#p111902

João

Also, please use punctuation. Don't leave it to the reader to figure out the separate parts of your question.

And say what radio you have. And post in the correct section (this is "website feedback").

I have a 450 E sky belt cp and its been a well flying chopper and I want to use the er9x for trans I have a turnigy receiver I cant get the trans. and receiver to work proper the movement is always wrong no matter what I do or input ali ele thr rud In the receiver its ali ele thr gyro or rud I have read the manual and still cant catch my error can you give me an idea in what Im doing wrong