Suggestion or question ???

Have something to say about 9xForums? Whether it be good or bad, about our products, site or service, tell us about it here.
Post Reply
fishman
Posts: 5
Joined: Thu Jan 07, 2016 7:59 pm
Country: -

Suggestion or question ???

Post by fishman » Wed Jan 13, 2016 7:23 am

Hi,

I have a proposal. Is it possible to add in simulate window of Open TXa schetch of a plane which shows what is acctually happening on all plane surfaces when you are setting mixes (move virtual sticks) ??? Its much easyer to see what you are doing then just by watching different sliders moving left and right.

User avatar
jhsa
Posts: 15431
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Suggestion or question ???

Post by jhsa » Wed Jan 13, 2016 10:25 am

Eepe and eepskye with the help of a little arduino board and serial adapter allow you to connect your model to the PC and you will see the model react to what you program in the computer. MUST REMOVE PROPS obviously. You can basically setup your model completely using the PC ;) But these programs are not for openTX. Eepe/eepskye are the editors for er9x and ersky9x.
If you want to have a look please search the forum for "serial in eepskye". If you are interested and can't find it I can post a link to it when I get to my computer.

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

fishman
Posts: 5
Joined: Thu Jan 07, 2016 7:59 pm
Country: -

Re: Suggestion or question ???

Post by fishman » Wed Jan 13, 2016 11:10 am

Well I think the idea was to see what are you doing with mixes.

Another option would be to directly link Open TX with fly sim. So you can mix your plane in open TX and press simulate and try to fly the thing (or see what is moving)???

User avatar
jhsa
Posts: 15431
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Suggestion or question ???

Post by jhsa » Wed Jan 13, 2016 11:40 am

The problem is different servos might move in different directions and it also depends on the way the serco is installed. On a simulator you can't also see how much throw a certain model would need.

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

User avatar
jhsa
Posts: 15431
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Suggestion or question ???

Post by jhsa » Wed Jan 13, 2016 11:53 am

Here are a couple videos and the link to the project page in case someone is interested.

https://www.youtube.com/watch?v=QyD7CZj2gqc

https://www.youtube.com/watch?v=lmvIIV9OyLU

And the project thread:

viewtopic.php?f=91&t=5476

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

Post Reply

Return to “Feedback”

Who is online

Users browsing this forum: No registered users and 1 guest