Posts pending approval?

Have something to say about 9xForums? Whether it be good or bad, about our products, site or service, tell us about it here.
Post Reply
User avatar
OctavioS
Posts: 657
Joined: Sun Aug 17, 2014 11:54 pm
Country: Portugal
Location: Madeira

Posts pending approval?

Post by OctavioS »

In recent days I have experienced, twice, my posts not being posted immediately and then after a few hours I receive an email that tells me that my post was approved by a moderator or administrator.
Can anybody tell me why this?
Have I been deemed hazardous for this forum and my posts are under somebody's surveillance?
2x - Turnigy 9X with 9xtreme board;
2x - Turnigy 9XRpro ;
Frsky Taranis & Taranis +;
Horus x10s;
Horus x12s;
Radiomaster TX16S Max mark II.

User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Posts pending approval?

Post by jhsa »

I don't think so.. Some of mine had to be approved as well.. sometimes I have to approve my own posts :) go figure ;)

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Posts pending approval?

Post by Kilrah »

There is a spam filter that will sometimes flag posts for review based on whatever conditions, could be ip/location, lots of links, no posts for a long time (common spammer behavior), etc...
User avatar
OctavioS
Posts: 657
Joined: Sun Aug 17, 2014 11:54 pm
Country: Portugal
Location: Madeira

Re: Posts pending approval?

Post by OctavioS »

ok, thx for info.
2x - Turnigy 9X with 9xtreme board;
2x - Turnigy 9XRpro ;
Frsky Taranis & Taranis +;
Horus x10s;
Horus x12s;
Radiomaster TX16S Max mark II.
FlyingHack
Posts: 4
Joined: Thu Sep 03, 2015 3:46 pm
Country: Norway

Re: Posts pending approval?

Post by FlyingHack »

They never seem to approve my posts....

User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Posts pending approval?

Post by Kilrah »

When you post in a recent topic we'll see it straight away, but when it's in an old topic it won't be visible in the "recent posts" and nobody will see it until they actually go to see the approval queue, sometimes nobody happens to do so for a couple of days/weeks.
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Posts pending approval?

Post by jhsa »

I normally do but am very limited at the moment as I can only use my phone with tapatalk. I do apologise..

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
User avatar
OctavioS
Posts: 657
Joined: Sun Aug 17, 2014 11:54 pm
Country: Portugal
Location: Madeira

Re: Posts pending approval?

Post by OctavioS »

It never happened to me again after this post.
2x - Turnigy 9X with 9xtreme board;
2x - Turnigy 9XRpro ;
Frsky Taranis & Taranis +;
Horus x10s;
Horus x12s;
Radiomaster TX16S Max mark II.

Post Reply

Return to “Feedback”