Wiki docs required

Post by **Rob Thomson** » Sun Feb 05, 2012 11:19 am

Hi all,

Thinking of the docs for the wiki.

We need to get a list of all hardware mods and variations together - so we can put a guide for each on the wiki.

E.g:

Dsm with module from lp4dsm tx
Dsm with module from dx4e
Etc...

If we collate all this info together on the wiki - it will be a huge benifit for noobs!

Rob

Sent from my iPhone using Tapatalk

wheelspinner20 · Post by **wheelspinner20** » Sun Feb 05, 2012 4:02 pm

Dont forget flysky too, Ive wanted to do that for a while, but, there are so many options that my head is spinning. So confusing which way to go diy? ttl converter, to hub or not to hub. et al.... the interested new or semi-new people get little bits and pieces from diy-ers. If I knew all the options, costs, skill level I would make a little chart.

Any help would be nice.

Pat

Post by **cre8tiveleo** » Sun Feb 05, 2012 4:15 pm

Working on a step by step with a dx4e, tear down, rip apart, desolder, solder, install... Etc etc etc.

Took pics of the tear down already... Something everyone needs.

I have an lp4 radio too that I can do the same to.

wheelspinner20 · Post by **wheelspinner20** » Sun Feb 05, 2012 4:16 pm

Is the lp4dsm the one that comes in all the cheap bnf stuff like the mcx2 and blade bnf products.??

Post by **cre8tiveleo** » Sun Feb 05, 2012 4:27 pm

Blade mcpx comes with a dx4e or hp6dsm. Bnf models come with either the lp4 (micro models) dx4e or dx5e for larger bnf models.

wheelspinner20 · Post by **wheelspinner20** » Sun Feb 05, 2012 4:30 pm

Thats important info, thanks, unless of course, the procedure is the same for all the various boards. If they are all different... thats more work.!

Post by **cre8tiveleo** » Sun Feb 05, 2012 4:40 pm

All the boards are basically the same. 3 pins, the only difference are the lp and hp power requirements, so only two different ways to install the modules.

Atmx11, atmx10 are the same, only difference is the side the pins are on, same pin config, just one has pins on one side of the board and the other has them on the opposite (underside)

---
I am here: http://maps.google.com/maps?ll=44.003067,-79.457256

Post by **Rob Thomson** » Sun Feb 05, 2012 4:50 pm

Fancy adding this to the wiki? You have edit wrings

Photos would be good!

Post by **cre8tiveleo** » Sun Feb 05, 2012 5:02 pm

Working on it. At work right now, so updating is difficult , loads of pics... I like doing step by step diys, did many for my car and the forum for 8th civics.

---
I am here: http://maps.google.com/maps?ll=44.003093,-79.457400

Post by **Rob Thomson** » Sun Feb 05, 2012 5:09 pm

Do I have to start cracking the whip

Post by **cre8tiveleo** » Sun Feb 05, 2012 5:15 pm

What kind you got? I have a couple i've made over the years. One is about 18 feet long. Nice deer hide and raw hide cat o nine too.

---
I am here: http://maps.google.com/maps?ll=44.003093,-79.457400

Hasse.69 · Post by **Hasse.69** » Sun Feb 05, 2012 5:31 pm

Hmmm
Whip one say and the other replays like an expert
Now i´m beeing seriously worried.

ReSt · Post by **ReSt** » Sun Feb 05, 2012 6:29 pm

Rob,
I could send you the NMEA doc as a MS Word (2002) file.
But it's nearly 23 MB big, and there is no real formatting in it.

Reinhard

Post by **Rob Thomson** » Sun Feb 05, 2012 7:45 pm

How about I give you rights.. and you add it?

The more who add to the wiki... the better.

ReSt · Post by **ReSt** » Sun Feb 05, 2012 10:48 pm

ok.

But I have no idea how that works.

Reinhard

Post by **Rob Thomson** » Mon Feb 06, 2012 6:41 am

Lol....

It largely is copy paste

I have given you rights for now.. will post up a guide later today!

Rob

openrcforums