In OpenTx is it possible to set the telemetry values (eg Alt) so that programs that use the telemetry can be simulated?
Thanks, john h
Open Tx Telemetry simulation
Re: Open Tx Telemetry simulation
Not at this point, no.
Envoyé de mon SM-G900F en utilisant Tapatalk
Envoyé de mon SM-G900F en utilisant Tapatalk
Re: Open Tx Telemetry simulation
Another question, I am trying to understand the “Edge” function using OpenTx Companion. With the function I understand the Duration field (sets the pulse length) but whenever I enter anything in the Delay field (far right OpenTx Companion Logic Switch Tab) I cannot get an output at all whereas I was expecting it to be a delay on when the input (V1) is removed.
For example:
L1, Function =Edge, V1=SH, V2 min = 3, V2 max= 6, Duration =10, delay = 0
Produces a 10 sec pulse provided SH released between 3 and 6 sec. Any entry in the Delay field and no output!
Thanks for all your help in the past
For example:
L1, Function =Edge, V1=SH, V2 min = 3, V2 max= 6, Duration =10, delay = 0
Produces a 10 sec pulse provided SH released between 3 and 6 sec. Any entry in the Delay field and no output!
Thanks for all your help in the past
Re: Open Tx Telemetry simulation
Delay isn't available with Edge as it makes no sense. It's disabled on the radio, but it seems that was forgotten in companion.
Sent via mobile
Sent via mobile