Open Tx Telemetry simulation

[bgbrik]

In OpenTx is it possible to set the telemetry values (eg Alt) so that programs that use the telemetry can be simulated?
Thanks, john h

[Kilrah]

Not at this point, no.

Envoyé de mon SM-G900F en utilisant Tapatalk

[bgbrik]

Another question, I am trying to understand the “Edge” function using OpenTx Companion. With the function I understand the Duration field (sets the pulse length) but whenever I enter anything in the Delay field (far right OpenTx Companion Logic Switch Tab) I cannot get an output at all whereas I was expecting it to be a delay on when the input (V1) is removed.

For example:
L1, Function =Edge, V1=SH, V2 min = 3, V2 max= 6, Duration =10, delay = 0
Produces a 10 sec pulse provided SH released between 3 and 6 sec. Any entry in the Delay field and no output!

Thanks for all your help in the past

[Kilrah]

Delay isn't available with Edge as it makes no sense. It's disabled on the radio, but it seems that was forgotten in companion.

Sent via mobile