OpenTX Companion 2.0.5 not saving curves in MIXES tab

A fork of eePe. It's aim is to provide one tool that works with ALL firmwares!
Post Reply
gdenton
Posts: 7
Joined: Tue Dec 27, 2011 8:05 pm
Country: United States

OpenTX Companion 2.0.5 not saving curves in MIXES tab

Post by gdenton »

OpenTX Companion 2.0.5
Radio Type = OpenTX for 9XR-PRO
New file.
New model.
MIXES tab - set Curve(1) on CH1 RUD.
Saved file.
Closed file.
Re-opened file.
MIXES tab - no curve on CH1 RUD.

I also confirmed firmware OpenTX 2.0.5 saves/restores it correctly on my new 9XR Pro.
But I read the model from the transmitter to OpenTX Companion and the curve is not there.

bertrand35
9x Developer
Posts: 2764
Joined: Fri Dec 30, 2011 11:11 pm
Country: -

Re: OpenTX Companion 2.0.5 not saving curves in MIXES tab

Post by bertrand35 »

gdenton
Posts: 7
Joined: Tue Dec 27, 2011 8:05 pm
Country: United States

Re: OpenTX Companion 2.0.5 not saving curves in MIXES tab

Post by gdenton »

Thanks Bertrand, where/how do I get the fixed version?
User avatar
dinamich
Posts: 288
Joined: Mon Apr 01, 2013 1:21 pm
Country: Slovenia
Location: Ljubljana

Re: OpenTX Companion 2.0.5 not saving curves in MIXES tab

Post by dinamich »

Wait for the next release of OpenTX 2.0.6
projectkk2glider@github

Post Reply

Return to “companion9x”