New to 9xr pro

Not sure what firmware to use? Making a new firmware? Ask in here!
Post Reply
Drone361
Posts: 2
Joined: Mon Nov 21, 2016 6:34 pm
Country: -

New to 9xr pro

Post by Drone361 »

Please forgive my complete idiot mess I'm in

Bought a 9xr pro

It's been modified with firmware and has two modules and two receivers. Both 8ch frsky

One has telemetry can't remember the other right now

Question is. I'm lost

No manual no where to start

Never used a tx other than what has come with my uav or a simple 6ch this and that

Turn on it says

Turn switches to regular position

Or push button to continue

I plug into apm get nothing in mission planner.

Try NAza nothing shows up

I flipped every switch turned all the knobs

I'm clueless

Any help to get me going?

I've bound tx and rx but like I said

I could be doing this all wrong

User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: New to 9xr pro

Post by jhsa »

First of all you have to find out what firmware you have installed on your radio. Then people that use the same firmware might try to help if they know how to.
So, first question, what does the radio say on the screen when you turn it on? Ersky9x or openTX?

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Drone361
Posts: 2
Joined: Mon Nov 21, 2016 6:34 pm
Country: -

Re: New to 9xr pro

Post by Drone361 »

Er sky 9x upon turning on TX

with fr sky v8fr II RX and fr sky module with telemetry

THANK YOU!

Post Reply

Return to “other”