Hi ,
I found this wonderful project while searching the internet sometimes back and thought of posting it here as it carries a great set of libraries and other stuff for the RC use.
Description from the site:
rCos (RemoteControl-OperatingSystem) is a software- and toolset for building modern computer remote controls for rc-models. In the core of the system there is an STM32 Microcontroller with C Open-Source firmware and multiple hardware expansion interfaces (SPI, Serial, I2C, ...).
http://www.rcos.eu/
And if you are fan of rcline.de http://www.rclineforum.de/forum/index.php you will find many DIY transmitters and RC projects.
Another good project from Th9x authors. )
(Alternative Software for Corona 2.4GHz DSSS System
https://code.google.com/p/oradiocontrol/
Hope this is of interest.
rCos Project
-
- 9x Developer
- Posts: 2764
- Joined: Fri Dec 30, 2011 11:11 pm
- Country: -
Re: rCos Project
It's not finished (oradiocontrol)
Bertrand.
Bertrand.
-
- Posts: 35
- Joined: Sun Sep 02, 2012 8:57 pm
- Country: -
Re: rCos Project
AFAIK with the current settings it can be used to fly something
http://www.rclineforum.de/forum/board49 ... gungssyst/
And as a side note if you are interested :
RCOS hardware for FM6014
http://www.rclineforum.de/forum/board49 ... ie-fm6014/
7 "monitor on the remote control box
http://www.rclineforum.de/forum/board49 ... enderpult/
http://www.rclineforum.de/forum/board49 ... gungssyst/
And as a side note if you are interested :
RCOS hardware for FM6014
http://www.rclineforum.de/forum/board49 ... ie-fm6014/
7 "monitor on the remote control box
http://www.rclineforum.de/forum/board49 ... enderpult/
Re: rCos Project
It is pretty dead.