Custom Spray
- Daryoon
- Posts: 60
- Joined: Sun Jan 08, 2012 5:07 pm
- Country: -
- Location: http://www.hacksmods.com
- Contact:
Re: Custom Spray
@thomas9x
That's not correct. If you open the EPS into Photoshop, you should have gotten a dialogue prompt. From there, just change the 72 to 300dpi or whatever you want. And you should get a nice size, printable file.
Give it another shot.
@nsf
Thanks for doing this. It's definitely a project that was on the back burner for me. And now, I don't have to do all the work.
That's not correct. If you open the EPS into Photoshop, you should have gotten a dialogue prompt. From there, just change the 72 to 300dpi or whatever you want. And you should get a nice size, printable file.
Give it another shot.
@nsf
Thanks for doing this. It's definitely a project that was on the back burner for me. And now, I don't have to do all the work.
- Daryoon
- Posts: 60
- Joined: Sun Jan 08, 2012 5:07 pm
- Country: -
- Location: http://www.hacksmods.com
- Contact:
Re: Custom Spray
BTW, the only thing I can critique about the file is four of the labels are in CMYK black and the other three labels are in RGB black.
It will cause inkjet printers to print the black a little different.
Thanks again.
It will cause inkjet printers to print the black a little different.
Thanks again.
Re: Custom Spray
Ahh, that's how it is suppose to work. Photoshop's prompt defaulted to 72dpi and I was too dim to know I could increase it. Thanks to your tip it works like a charm and I have very high-res images now.@thomas9x
That's not correct. If you open the EPS into Photoshop, you should have gotten a dialogue prompt. From there, just change the 72 to 300dpi or whatever you want. And you should get a nice size, printable file.
- Thomas
Re: Custom Spray
Thanks Daryoon, don't know what happened, but missed that.Daryoon wrote:BTW, the only thing I can critique about the file is four of the labels are in CMYK black and the other three labels are in RGB black.
It will cause inkjet printers to print the black a little different.
Thanks again.
Uploaded new files in rgb mode. I think they are all the same now.
Re: Custom Spray
nice one nfs !!! btw can u make sticker template for casing ring around the gimbal? it would be nice
Re: Custom Spray
I added a transparent vinyl over the printed one to give extra protection to the printing, so I think there should be no problem with that.kaos wrote:Nice labels.
How durable those labels and the glue on the back are? I always have a problem withe the label right above the sticks, because that is where I finger holding the Tx rest. the stock protective film just wrinkles up then the printing get messed up after a while.
Re: Custom Spray
I could try, but can you elaborate more. Don't understand what you mean by "around the gimbal". You want a sticker for the casing around the gimbal or one for the gimbal itself.zuadha wrote:nice one nfs !!! btw can u make sticker template for casing ring around the gimbal? it would be nice
Re: Custom Spray
sorry for my english (i'm not native btw).. what i mean is sticker for the casing around the gimbal, that its like a ring shape, but not perfect ring because the button in the bottom and the side near transmitter strap holder..nsf wrote:I could try, but can you elaborate more. Don't understand what you mean by "around the gimbal". You want a sticker for the casing around the gimbal or one for the gimbal itself.zuadha wrote:nice one nfs !!! btw can u make sticker template for casing ring around the gimbal? it would be nice
i hope u understand what i mean
BTW the LCD sticker that you give its perfect square, on the "menu" and "exit" label, meanwhile that the one that you use its like the old one have a shape more out on the right side, and does'nt have circle shape too at the left side (i download an AI files)
- Scott Page
- Posts: 864
- Joined: Wed Dec 28, 2011 3:32 am
- Country: United States
- Location: Tri-Cities, Washington State
Re: Custom Spray
Zuadha,
The square shape of the screen label allows it to be applied to the screen and then trimmed to be an exact match with the edges. It's easiest to remove the screen to do this, and replace it after.
The square shape of the screen label allows it to be applied to the screen and then trimmed to be an exact match with the edges. It's easiest to remove the screen to do this, and replace it after.
Re: Custom Spray
There is a small groove between the screen and the case, that can be used as a guide for a very sharp (new) scalpel blade. No need to dismantle the TX to do this. I have fitted a protective film over my screen that has been replaced a couple times this way. The film I have used is the stuff that is used to cover sheets of paper. Most supermarkets over here have it. I bought a roll of it from ASDA.
- Scott Page
- Posts: 864
- Joined: Wed Dec 28, 2011 3:32 am
- Country: United States
- Location: Tri-Cities, Washington State
Re: Custom Spray
I bought some of the adhesive vinyl and waterproof over-laminate to try my hand at making better labels. This stuff makes great stickers for airplanes - really sweet .... at least for electric. Attached is my attempt to make a new screen for my wife's Tx. I cut the screen from a CD case (using laser cutter). My eyesight is not very good so my cutting leaves alot to be desired, but attached is my result. BTW: I also have tremor in my hands -- which is why I enjoy hotliners so much - everybody watches when I fly.
Re: Custom Spray
Scott, can't you cut the vinyl label in the laser cutter?
- Scott Page
- Posts: 864
- Joined: Wed Dec 28, 2011 3:32 am
- Country: United States
- Location: Tri-Cities, Washington State
Re: Custom Spray
Probably can and am going to try. Getting the registration exactly right will be the challenge, but after I looked at what my best cutting got me today .. I'm thinking about giving it a go. I'll practice with paper targets first.nsf wrote:Scott, can't you cut the vinyl label in the laser cutter?
BTW: the CD case screen covers are a tiny bit thicker than I'd like -- but they are cheap enough. I've got boxes of them brand new and not likely to be used otherwise.
Re: Custom Spray
I'm thinking in buying this with 1 mm thick. I have to cut it then (don't know where yet), if I need to replace mine.
When I was doing mine I measured it with a digital caliper and the original lcd cover was 1.2 or 1.3 mm thick.
When I was doing mine I measured it with a digital caliper and the original lcd cover was 1.2 or 1.3 mm thick.
- cre8tiveleo
- Posts: 1434
- Joined: Tue Dec 27, 2011 6:13 pm
- Country: -
- Location: Ontario,(GTA North)
- Contact:
Re: Custom Spray
You can cut the 1mm on a vinyl cutter (at least on mine) , you can also then use the cutter to engrave the plexi, place smd leds along the side, and, voila, some kick ass glowing fonts/logos on your lcd.
- Scott Page
- Posts: 864
- Joined: Wed Dec 28, 2011 3:32 am
- Country: United States
- Location: Tri-Cities, Washington State
Re: Custom Spray
O gawd leo -- you are the Devil. I just left the cutting lab content that I could get perfect registration for cutting the labels, and now I'm tasked with yet another idea I find absolutely exciting!!!.
- Scott Page
- Posts: 864
- Joined: Wed Dec 28, 2011 3:32 am
- Country: United States
- Location: Tri-Cities, Washington State
Re: Custom Spray
NSF -- could you please upload those images to this site. I went to look at them again for reference and they are GONE! ACK! I need some inspiration.nsf wrote:What do you guys think ?
Re: Custom Spray
Gone??? I can see them here: viewtopic.php?f=26&t=8&start=30#p34621 and in your reply.
What exactly do you need? Do you want a larger image? Some detail in particular? If you need anything just ask.
Had to open the radio to do a full erase (see here). Since it's open, I think I'm going to take some pictures of the inside. I had some problems with the navigation buttons because I wanted to reverse the + and -, as suggested here by erazz. On the assembling I kept having problems with the up button, always getting stuck. My solution was cutting off all the buttons of the plastic frame, apply a dab of glue and place them directly on the switches in the board.
I was a little sceptical about this, but it surprised me. Pushing the buttons feels completly different now comparing to the stock 9x I have. They are more smooth and responsive and less noisy.
What exactly do you need? Do you want a larger image? Some detail in particular? If you need anything just ask.
Had to open the radio to do a full erase (see here). Since it's open, I think I'm going to take some pictures of the inside. I had some problems with the navigation buttons because I wanted to reverse the + and -, as suggested here by erazz. On the assembling I kept having problems with the up button, always getting stuck. My solution was cutting off all the buttons of the plastic frame, apply a dab of glue and place them directly on the switches in the board.
I was a little sceptical about this, but it surprised me. Pushing the buttons feels completly different now comparing to the stock 9x I have. They are more smooth and responsive and less noisy.
- Scott Page
- Posts: 864
- Joined: Wed Dec 28, 2011 3:32 am
- Country: United States
- Location: Tri-Cities, Washington State
Re: Custom Spray
O -- I wonder if the filters @ work are scrubbing them. I'll check from home. Thanks.
-
- Posts: 55
- Joined: Tue Jan 08, 2013 4:12 am
- Country: -
- Location: Texas
Re: Custom Spray
I'm doing a spray on mine and made it back home from the graphics shop and looked at them against the origional. The pit trim / aux 2 pot 0/+/- is mirrored:-(. Can it be fixed for the next guy?
Although 1 sticker has a minor error, the set looks totally awesome. Can't wait to get the Tx started...thanks NSF.
Although 1 sticker has a minor error, the set looks totally awesome. Can't wait to get the Tx started...thanks NSF.
Jim
"Any intelligent fool can make things bigger and more complex...It takes a touch of genius - and a lot of courage to move in the opposite direction."
- Albert Einstein
"Any intelligent fool can make things bigger and more complex...It takes a touch of genius - and a lot of courage to move in the opposite direction."
- Albert Einstein
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: Custom Spray
Not actually an error.
At some point flysky started sending the radio out with different stickers. So pot luck which sticker type you get!
Sent from my Nexus 7 using Tapatalk 2
At some point flysky started sending the radio out with different stickers. So pot luck which sticker type you get!
Sent from my Nexus 7 using Tapatalk 2
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
-
- Posts: 55
- Joined: Tue Jan 08, 2013 4:12 am
- Country: -
- Location: Texas
Re: Custom Spray
It's actually a Turnigy radio, so it's probably more likely that it's a misprint. I never looked around at other Txs on the net, just looked at mine...so I guess now my Tx will be correct after the stickers go on. Thanks for the clarification Rob.
Jim
"Any intelligent fool can make things bigger and more complex...It takes a touch of genius - and a lot of courage to move in the opposite direction."
- Albert Einstein
"Any intelligent fool can make things bigger and more complex...It takes a touch of genius - and a lot of courage to move in the opposite direction."
- Albert Einstein
Re: Custom Spray
Maybe yours is the one thats mirrored ....just kidding
Have a turnigy 9x right here with me and it's exactly as the templates I posted.
Here it is:
Have a turnigy 9x right here with me and it's exactly as the templates I posted.
Here it is:
-
- Posts: 55
- Joined: Tue Jan 08, 2013 4:12 am
- Country: -
- Location: Texas
Re: Custom Spray
Yea, I got back home and looked at mine (the "wacky-doo" version) and just "assumed" it was someone elses mistake when it was actually my own...well at least my Tx.nsf wrote:Maybe yours is the one thats mirrored ....just kidding
sorry.
thanks again for the sticker templates.
Jim
"Any intelligent fool can make things bigger and more complex...It takes a touch of genius - and a lot of courage to move in the opposite direction."
- Albert Einstein
"Any intelligent fool can make things bigger and more complex...It takes a touch of genius - and a lot of courage to move in the opposite direction."
- Albert Einstein
Re: Custom Spray
How did you get the white on the lettering like up, down, etcnsf wrote:What do you guys think ?
-
- Posts: 55
- Joined: Tue Jan 08, 2013 4:12 am
- Country: -
- Location: Texas
Re: Custom Spray
I've made progress. Electronics disassembled/lables-lens removed/cleaned-prepped case/primed-painted base coat (it's red, really). I will aquire items to start test runs for a swirl paint next weekend...
- Attachments
Jim
"Any intelligent fool can make things bigger and more complex...It takes a touch of genius - and a lot of courage to move in the opposite direction."
- Albert Einstein
"Any intelligent fool can make things bigger and more complex...It takes a touch of genius - and a lot of courage to move in the opposite direction."
- Albert Einstein
-
- Posts: 55
- Joined: Tue Jan 08, 2013 4:12 am
- Country: -
- Location: Texas
Re: Custom Spray
cont...
- Attachments
Jim
"Any intelligent fool can make things bigger and more complex...It takes a touch of genius - and a lot of courage to move in the opposite direction."
- Albert Einstein
"Any intelligent fool can make things bigger and more complex...It takes a touch of genius - and a lot of courage to move in the opposite direction."
- Albert Einstein
-
- Posts: 55
- Joined: Tue Jan 08, 2013 4:12 am
- Country: -
- Location: Texas
Re: Custom Spray
lardo5150 wrote:
How did you get the white on the lettering like up, down, etc
I don't know how he did it...but in the past and how I will do mine (for resessed lettering) is with a toothpick.
Jim
"Any intelligent fool can make things bigger and more complex...It takes a touch of genius - and a lot of courage to move in the opposite direction."
- Albert Einstein
"Any intelligent fool can make things bigger and more complex...It takes a touch of genius - and a lot of courage to move in the opposite direction."
- Albert Einstein
- Scott Page
- Posts: 864
- Joined: Wed Dec 28, 2011 3:32 am
- Country: United States
- Location: Tri-Cities, Washington State
Re: Custom Spray
Keeping the nut on the tool is a challenge -- more of a challenge than I anticipated. Once I got the hang of it this is the procedure. You'll need to open the TX to do this in order to keep the switch in place and from turning. Check to see if the hole needs to be enlarged or if the bottom rim (for lack of a better word) of the nut will fit into the hole. I believe I had to enlarge AIL, 3-way, ELE, TNR, and THR. Just use a sharp reamer. Then put the nut on the tool. I held the nut with a thin strip of fabric tape. I used gaffer tape, but I think thin strip of duct tape would work as well. Once the nut is screwed in place I think it will likely be more secure than the stock nuts -- which tend to come loose on me from time to time. I say this because they have a lower rim that fits into the Tx and have considerably more thread engaged. The thing about these nuts is that they match so well, they are not really noticeable. Hard to call it bling if it blends in.
-
- Posts: 55
- Joined: Tue Jan 08, 2013 4:12 am
- Country: -
- Location: Texas
Re: Custom Spray
Where did you get the colored nuts at? And the tool for the nuts?
Jim
"Any intelligent fool can make things bigger and more complex...It takes a touch of genius - and a lot of courage to move in the opposite direction."
- Albert Einstein
"Any intelligent fool can make things bigger and more complex...It takes a touch of genius - and a lot of courage to move in the opposite direction."
- Albert Einstein