9x switch not working

Where to find parts? Refactoring your entire transmitter, new cases? Sticks etc..
Post Reply
Flydigital
Posts: 32
Joined: Fri Jan 24, 2014 10:32 am
Country: United Kingdom
Location: London

9x switch not working

Post by Flydigital »

The top left rear switch on the 9x - THR is not working for me. I used it to turn back light on and off. Now it is on all the time. I opened it up and checked the actual switch and it's working fine. (tested using a simple LED light circuit)

Is there something else I can check or replace to get this switch working again?

Thanks for any help...

User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: 9x switch not working

Post by jhsa »

Check all the connectors are fully inserted on the mainboard..
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Flydigital
Posts: 32
Joined: Fri Jan 24, 2014 10:32 am
Country: United Kingdom
Location: London

Re: 9x switch not working

Post by Flydigital »

That sorted it thanks!
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: 9x switch not working

Post by jhsa »

That is a very common problem.. And one of the first things to do when troubleshooting the TX, is to make sure all the connectors are fully inserted..

Anyway, glad that it was that simple ;)

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

Post Reply

Return to “Hardware Mods”