Hello,
i trie to setup the telemetry data from my APM to the 9XR flashed with OpenTX, but it doesnt work. I have read many posts on the forum and try this out but nothing works.
I have now the folowing setup:
APM -> Arduino pro mini (16Mhz, Atmega328p) -> FrSky D8R-II PLUS -> FrSky DJT
- The telemetry mod is setup with this tutorial:
http://forum.turnigy9xr.com/download/fi ... 78c15fa014
- The Arduino is flasht with "jD_IOBoard_FrSkyMAVLink.v03a.hex"
- 9XR is flashed with OpenTX 2.0.8
- In the OpenTX build options i have selected the "Mavlink".
All posts that i have read are for the 9X and the D4R-II or X8R Receiver, but not for actualy my configuration Where could be the problem? Thanks
Danijel
APM Telemetry to
Re: APM Telemetry to
You shouldn't. The whole point of the ioBoard is to translate mavlink to native FrSky format.DaniSi wrote: - In the OpenTX build options i have selected the "Mavlink".
Re: APM Telemetry to
But which option i muss choose? I have also trie "Frsky" and "Ardupilot", and also no luck.
Re: APM Telemetry to
Should work with FrSky.
Can you check you actually get RSSI from the receiver (without the ioboard connected)? If not, there might be a prob with your telemetry mod.
Can you check you actually get RSSI from the receiver (without the ioboard connected)? If not, there might be a prob with your telemetry mod.
Re: APM Telemetry to
Now i cant check on that because i dont have it home. But the analog telemetry on A1 and A2 has work before.
Re: APM Telemetry to
I had one antoher quastion. Is it posible to check with a FTDI if i get data out of the Arduino pro mini?